If possible, designers and manufacturers should incorporate more space to enhance the ease of loading and unloading and to accommodate a greater variety of personal mobility devices....
Search Results "Design Guideline"
Filters
Commonly Searched Documents
-
Amusement Rides with Wheelchair Spaces
-
Definition [F106.5]
A trailhead is defined as an outdoor space that is designated by an entity responsible for administering or maintaining a trail to serve as an access point to the trail....
-
What accessibility requirements apply to EV charger installation outside of California?
Specific technical requirements for EVCS are not specified in the 2010 ADA Standards for Accessible Design....
-
§ 382.3 Primary (or Main) Web site
., www.carriername.com, www.airline designator code.com) in an Internet browser from a standard desktop or laptop computer where the carrier advertises or sells air transportation to the...
-
703.2 Raised Characters
Signs that are designed to be read by touch should not have sharp or abrasive edges....
-
4.3.4 Tent Pad or Platform Surface
Tent pads and platforms shall have a surface that is firm and stable and is designed to allow use of tent stakes and other tent securing devices. Exception. ...
-
A4.10.12 CAR CONTROLS
Industry-wide standardization of elevator control panel design would make all elevators significantly more convenient for use by people with severe visual impairments....
-
4.3.4 Tent Pad or Platform Surface
Tent pads and platforms shall have a surface that is firm and stable and is designed to allow use of tent stakes and other tent securing devices. Exception....
-
§ 37.169(a)(1)
(1) A public entity providing designated public transportation, in meeting the reasonable modification requirement of § 37.5(g)(1) with respect to its fixed route, demand responsive, and...
-
USE ZONE
[DSA-AC] The ground level area beneath and immediately adjacent to a play structure or play equipment that is designated by ASTM F 1487 for unrestricted circulation around the play equipment...
-
§ 37.169(a)(1)
(1) A public entity providing designated public transportation, in meeting the reasonable modification requirement of §37.5(i)(3) with respect to its fixed route, demand responsive, and...
-
USE ZONE
[DSA-AC] The ground level area beneath and immediately adjacent to a play structure or play equipment that is designated by ASTM F 1487 for unrestricted circulation around the play equipment...
-
Willoughby Industries WWF-5406/5408 AquaFount® Six and Eight Station Full Round 54" Solid Surface Deep Bowl Washfountain
ADA, TAS, and ANSI Compliant: At the standard 34" adult rim height, all stations are designed to comply with applicable ADA, TAS, and ANSI Z124.3 and Z124.6 accessibility guidelines....
-
TownSteel ED1300 Grade 1 Concealed Vertical Rod Panic Device
The ED1000 Series Exit Devices and Trims are designed for new or retrofit installation of Von Duprin 98/99 Series. ED1300 is ANSI Certified Grade 1 and UL listed for Panic Hardware....
-
Bradley Diplomat Soap Dispenser 6A00
Diplomat Series Model 6A00: Surface-mounted automatic soap dispenser, with face formed with contemporary contours, radii, and finish matching related accessories in manufacturer's designer...
-
Section 1193.51 Compatibility [1193.41 in the NPRM] (Section-by-Section Analysis)
However, specialized customer premises equipment is regarded as a subset of customer premises equipment and, therefore, subject to these guidelines....
-
Play areas. (Section-by-Section Analysis)
., a state park) provides multiple play areas designed for the same age group....
-
Shower Spray Unit
The guidelines require tubs to have shower spray units that can be used as both a fixed position shower head and a hand-held shower (607.6)....
-
105.2.5 NFPA, F105.2.5 NFPA
The final rule edits the references to the sections of the guidelines that require compliance with the NFPA 72 National Fire Alarm Code to conform to the renumbered technical requirements...
-
Handpumps and Water Systems
For shallower wells, this pump can draw the water while remaining in full compliance with the grasping, turning, and pressure restrictions of the accessibility guidelines (figure 17)....
-
1009.2.4 Seat Height
The height of the lift seat shall be designed to allow a stop at 16 inches (405 mm) minimum to 19 inches (485 mm) maximum measured from the deck to the top of the seat surface when in the...
-
(8) the City's policies and procedures
(8) the City's policies and procedures regarding new construction and alterations, which do not require a close-out inspection for compliance with federal disability access design standards...
-
Technical Memorandum TM 2012-09 Employee Break Rooms
22, 2013 2012 TAS Reference: 212 and 804 In accordance with TAS 106.5.28, kitchenettes and break rooms are not employee work areas; therefore, they must be accessible and must be designed...
-
§27.7(d) Aid, benefits, or services limited by Federal law
For aid, benefits, or services authorized by Federal statute or executive order that are designed especially for persons with a disability, or for a particular class of persons with a disability...
