Transfer Supports Location and Configuration M301.3 and M302.3 Location of the transfer supports shall be a minimum of 6 inches to a maximum of 19 inches from the top of the transfer surface...
Search Results "Kitchen Work Surface"
Filters
Commonly Searched Documents
-
Transfer Supports Location and Configuration M301.3 and M302.3
-
11B-705.2 Detectable directional texture
transit boarding platforms shall comply with Figure 11B-705.2 and shall be 0.1 inch (2.5 mm) in height that tapers off to 0.04 inch (1.0 mm), with bars raised 0.2 inch (5.1 mm) from the surface...
-
STORY
[DSA-AC] That portion of a building or facility designed for human occupancy included between the upper surface of a floor and upper surface of the floor or roof next above....
-
Emergency Evacuation Planning Guide For People with Disabilities
Disabilities • Cognitive Disabilities ________________________________________________________________________ © June 2016 National Fire Protection Association All or portions of this work...
-
§ 36.302(c)(6)
A public accommodation may ask if the animal is required because of a disability and what work or task the animal has been trained to perform....
-
What is Reasonable Accommodation?
Reasonable accommodation is any change or adjustment to a job or work environment that permits a qualified applicant or employee with a disability to participate in the job application process...
-
§ 35.136(f) Inquiries
A public entity may ask if the animal is required because of a disability and what work or task the animal has been trained to perform....
-
10. How does an employee with a hearing disability request a reasonable accommodation?
A person simply has to tell the employer that she needs an adjustment or change at work because of her hearing impairment....
-
5. What will happen after I ask for a reasonable accommodation?
Your employer may ask you to put your request in writing, and to generally describe your condition and how it affects your work....
-
Introduction
them to return to work. ...
-
405 Ramps
Employee work area ramps do not have to meet the specified 36 inch minimum clear width where a decrease is necessary due to equipment within the work area so long as the decrease is essential...
-
609 Grab Bars
Specifications address size, spacing, position, surfaces, fittings, and structural strength....
-
Floor Height [1013.4]
If the tent platform floor is raised above grade, the floor height must be no more than 19 inches when measured from the clear ground space to the tent platform surface....
-
2.7 Tread Obstacles
Where tread obstacles exist on the surface of an ORAR, they shall not exceed 1 inch (25 mm) in height....
-
3. Medical Diagnostic Equipment
rulemaking (NPRM) to remove the sunset provisions in the our existing accessibility standards for medical diagnostic equipment (MDE) related to the low-height specifications for transfer surfaces...
-
Subject testing
A study was designed to investigate a correlation between surface roughness and WBV exposure to WC users in an attempt to determine which surfaces should be considered acceptable....
-
American Standard Cadet 1.1 gpf FloWise Right Height Pressure Assisted Elongated Toilet 2467100
low consumption (1.1gpf/4.2Lpf), utilizes 31% less water Meets EPA WaterSense® criteria Combination bowl and tank, less seat 12" (305mm) rough EverClean® Surface...
-
American Standard Yorkville 1.1 gpf FloWise Right Height Elongated Pressure Assisted Toilet
Elongated 16-1/2" high bowl rim for accessible applications Fully glazed 2-1/8" trapway 10" x 12" water surface area Close-coupled flushometer tank...
-
Completing Measurements and Recording Information
One person can complete a survey of a polling place but it is often quicker and easier for two people to work together....
-
MAINTENANCE OF ACCESSIBLE FEATURES {35.133}
MAINTENANCE OF ACCESSIBLE FEATURES {35.133} Features of facilities and equipment required to be “readily accessible to and usable by” must be maintained in operable working order Isolated...
-
Reconstruction
Reconstruction—This word is not used in Federal accessibility guidelines or FSORAG and FSTAG, even though it is used frequently by people who work in recreation and trails....
-
5. Significance and Use
5.1 This practice provides a means for obtaining a quantitative estimate of a surface property defined as roughness using longitudinal profile measuring equipment. 5.1.1 The PRI is portable...
-
Story
That portion of a building included between the upper surface of a floor and upper surface of the floor or roof next above....
-
1132A.4 Level floor or landing
Primary entry doors, required exit doors or secondary exterior doors with changes in height between the interior surface or floor level and the exterior surface or floor level shall comply...
