If alterations of single elements, when considered together, amount to an alteration of a room or space in a building or facility, the entire room or space shall be made accessible....
Search Results "Incidental Space"
Filters
Commonly Searched Documents
-
11B-202.3.3 Alteration of single elements
-
11B-202.3.3 Alteration of single elements
If alterations of single elements, when considered together, amount to an alteration of a room or space in a building or facility, the entire room or space shall be made accessible....
-
Common Requirements (R304.5) (Section-by-Section Analysis)
Grade breaks are not permitted on the surface of ramp runs and turning spaces. Surface slopes that meet at grade breaks must be flush....
-
Mary Ann Hay, IALD, LEED™ AP. Artificial Lighting
and have the space feel comfortable....
-
General: ADA Standard Section 205.1
Section 205.1 of the ADA Standards covers information on scoping requirements for operable parts in the most current ADA Standards.
-
T505.3 Location of Operable Parts
Operable parts shall be located so that they are reachable by passengers using wheelchair when parked in a clear space 30 inches (760 mm) wide minimum and 48 inches (1220 mm) long minimum...
-
202.3 Alterations
Where existing elements, spaces, or common use areas are altered, each altered element, space, or common use area shall comply with the applicable requirements of Chapter 2....
-
Employee Work Areas [§203.9]
. (§206.2.8) Other requirements, including those for turning space, do not apply to areas used only by employees for work....
-
1124B
SECTION 1118B - SPACE ALLOWANCE AND REACH RANGES 1118B.4 Clear floor or ground space for wheelchairs. 1. Size and approach. ...
-
Pressalit Care VALUE Support Arm Fixed Height Swing Grab Bar
The support arm can fold up when not in use or to make more space. Maximum Vertical Load: 264Lbs. (120 kg)...
-
B6
Does each accessible parking space have a sign with the symbol of accessibility that is visible when a vehicle is parked in the space? [ADA Standards § 4.6.4] Yes No...
-
A6. ISA Signage
Does each accessible parking space have a sign with the symbol of accessibility that is visible when a vehicle is parked in the space? [ADA Stds 4.6.4] Yes _____ No _____...
-
4.6.4* SIGNAGE
Accessible parking spaces shall be designated as reserved for the disabled by a sign showing the symbol of accessibility (see 4.30.5)....
-
11B-230.1 General
This requirement applies to facilities such as office buildings, courthouses, and other facilities where admittance to the building or restricted spaces is dependent on two-way communication...
-
Scoping Requirements [F244.5, F245.4, F246.4, and F247.3.2]
Within camping and picnic facilities, ORARs must connect accessible elements, spaces, and facilities provided within camping and picnic units with mobility features....
-
11B-904.4.2 Forward approach
Knee and toe space complying with Section 11B-306 shall be provided under the counter....
-
§ 38.23(d)(2) Location and size
Such space shall adjoin, and may overlap, an access path....
-
11B-904.4.2 Forward approach
Knee and toe space complying with Section 11B-306 shall be provided under the counter....
-
1010.1.8 Door arrangement
Space between two doors in a series shall be 48 inches (1219 mm) minimum plus the width of a door swinging into the space....
-
1003.2.13 Accessible means of egress
Accessible spaces shall be provided with not less than one accessible means of egress....
-
Utilities at Recreation Sites
size, or location), the clear floor or ground space only has to comply with requirements to the extent practicable....
-
Table of Contents
202 Existing Buildings and Facilities 203 General Exceptions 204 Protruding Objects 205 Operable Parts 206 Accessible Routes 207 Accessible Means of Egress 208 Parking Spaces...
-
§ 36.406(f)(3)
(3) Facilities that have more than 5,000 seats shall provide at least five wheelchair spaces and at least three companion seats for each wheelchair space; and...
-
Technical Memorandum TM 2013-22 Storage (Kitchens and Kitchenettes)
Access Board “shelf space” shall be calculated by linear feet and drawers shall be considered shelving for purposes of determining compliance with TAS 804.5....
