Beneficial Designs, Inc., is working on a project called Designing an Accessible Vehicle Barrier for Trails....
Search Results "Floor Designation"
Filters
Commonly Searched Documents
-
Other Related Projects
-
CRL-Blumcraft® Access Control Handles 08 7100
UL, ULC, and ANSI/BHMA Certified Available in New Designer Series For a Unique, Modern Look Elegant Tubular Design Available in Polished and Brushed Stainless, Satin and Polished...
-
307.4 Vertical Clearance
The leading edge of such guardrail or barrier shall be located 27 inches (685 mm) maximum above the finish floor or ground....
-
9.4 POST OFFICE BOXES
Accessible post office boxes shall be located in the second or third set of modules from the floor, approximately 12 in to 36 in (305 mm to 915 mm) above the finished floor....
-
§35.173(a)
(a) When the designated agency issues a noncompliance Letter of Findings, the designated agency shall--...
-
§ 35.173(a)
(a) When the designated agency issues a noncompliance Letter of Findings, the designated agency shall—...
-
M301.4.1 Clearance in Base (Section-by-Section Analysis)
Three commenters (two manufacturers and one medical association) raised concerns with the six-inch vertical clearance measured from the floor requirement....
-
Van Accessible Signage
spaces over those designed to accommodate vans....
-
4. Desk with knee and toe space
Desk with knee and toe space and clear floor space for front approach....
-
Addition
An expansion, extension, or increase in the gross floor area or height of a building or facility....
-
5.3.2.2 Surface
The surface of the turning space and clear floor or ground space shall be firm and stable....
-
6b.
Is the change in level from the floor to the lift surface ramped or beveled? Yes _____ No _____...
-
604.8.1.4 Toe Clearance
The front partition and at least one side partition shall provide a toe clearance of 9 inches (230 mm) minimum above the finish floor and 6 inches (150 mm) deep minimum beyond the compartment-side...
-
604.7 Dispensers
The outlet of the dispenser shall be 15 inches (380 mm) minimum and 48 inches (1220 mm) maximum above the finish floor and shall not be located behind grab bars....
-
404.2.3 Clear Width
There shall be no projections into the required clear opening width lower than 34 inches (865 mm) above the finish floor or ground....
-
604.8.1.4 Toe Clearance
The front partition and at least one side partition shall provide a toe clearance of 9 inches (230 mm) minimum above the finish floor and 6 inches (150 mm) deep minimum beyond the compartment-side...
-
404.2.3 Doorways - Clear Width
There shall be no projections into the required clear opening width lower than 34 inches (865 mm) above the finish floor or ground....
-
404.2.3 Doorways - Clear Width
There shall be no projections into the required clear opening width lower than 34 inches (865 mm) above the finish floor or ground....
-
10 - foot straightedge method
10 - foot straightedge method This is the classic method for determining the flatness of concrete and other types of finished floors....
-
11B-404.2.3 Clear width
There shall be no projections into the required clear opening width lower than 34 inches (864 mm) above the finish floor or ground....
-
11B-404.2.3 Clear width
There shall be no projections into the required clear opening width lower than 34 inches (864 mm) above the finish floor or ground....
-
TTYs: ADA Standard Section 217.4
Section 217.4 covers scoping requirements in the current ADA Standards for TTYs.
-
Height: ADA Standard Section 606.3
Section 606.3 covers the current ADA Standards for the height of lavatories and sinks.
-
11B-233.3.4.3 Alterations to residential dwelling units with adaptable features
Exception: Where any portion of a building’s exterior is preserved, but the interior of the building is removed, including all structural portions of floors and ceilings and a new building...
