Where signs or other objects are mounted on posts or pylons, and their bottom edges are less than 80 inches (2032 mm) above the floor or ground surface, the edges of such signs and objects...
Search Results "Smooth Surface"
-
11B-307.3.1 Edges and corners
-
705.1.2 Dome Spacing
Truncated domes in a detectable warning surface shall have a center-to-center spacing of 1.6 inches (41 mm) minimum and 2.4 inches (61 mm) maximum, and a base-to-base spacing of 0.65 inch...
-
Roughness Calculation
Therefore, if the depth of the cracks were doubled, the chair would have the exact same reaction to the surface....
-
AJW Architectural Products US18 Collapsable Security Hook, Chase Mounting
All seams are tig welded and ground smooth. Pivoting ball joint releases when excessive force is applied. (Aprx: 15lbs.) Back plate has weld nuts to receive 1/4"-20 studs....
-
Bradley 2-Station Verge Lavatory System LVGD2
As with all lavatory systems by Bradley, the Verge is designed to cut down on installation time and costs, as it requires fewer connections and parts - all in a seamless, smooth look that...
-
Moen M–BITION Chrome One-Handle Lavatory Faucet 8430
chrome or LifeShine classic brushed nickel finish that will complement stainless steel fixtures commonly found in commercial 1255® duralast® ceramic cartridge designed to offer the smooth...
-
Bradley 3-Station Verge Lavatory System LVGD3
As with all lavatory systems by Bradley, the Verge is designed to cut down on installation time and costs, as it requires fewer connections and parts - all in a seamless, smooth look that...
-
Bradley 1-Station Verge Lavatory System LVGD1
As with all lavatory systems by Bradley, the Verge is designed to cut down on installation time and costs, as it requires fewer connections and parts - all in a seamless, smooth look that...
-
Moen M–BITION Chrome One-Handle Lavatory Faucet 8400
LifeShine classic brushed nickel finish that will complement stainless steel fixtures commonly found in commercial 1255® duralast® ceramic cartridge designed to offer the smooth...
-
Moen M–BITION Classic Brushed Nickel One-Handle Lavatory Faucet 8437CBN
LifeShine classic brushed nickel finish that will complement stainless steel fixtures commonly found in commercial 1255® duralast® ceramic cartridge designed to offer the smooth...
-
Protruding Objects and Outdoor Recreation Access Routes
width area of an outdoor recreation access route, resting interval, or passing space and that are between 27 inches (685 millimeters) and 80 inches (2,030 millimeters) above the travel surface...
-
4.2 Stretchers
The second feature is the patient support surface (mattress), which is currently purchased separately from the stretcher deck....
-
11B-707.6.3.2 Tactile symbols
Function key surfaces shall have tactile symbols as follows: Enter or Proceed key: raised circle; Clear or Correct key: raised left arrow; Cancel key: raised letter ex; Add Value key: raised...
-
11B-411.2.1.5.1 Size
Buttons shall have square shoulders, be 3/4 inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding surface...
-
705.1.1 Dome Size
Truncated domes in a detectable warning surface shall have a base diameter of 0.9 inch (23 mm) minimum and 1.4 inches (36 mm) maximum, a top diameter of 50 percent of the base diameter minimum...
-
1007 Miniature Golf Facilities
This section covers miniature golf courses and contains specifications for accessible routes that take into account design conventions for miniature golf courses, such as carpeted play surfaces...
-
707.6.3.2 Tactile Symbols
Function key surfaces shall have tactile symbols as follows: Enter or Proceed key: raised circle; Clear or Correct key: raised left arrow; Cancel key: raised letter ex; Add Value key: raised...
-
1009.2.2 Seat Location
The deck surface between the centerline of the seat and the pool edge shall have a slope not steeper than 1:48. Figure 1009.2.2 Pool Lift Seat Location...
-
1018.6 Openings
Openings in the surface of beach access routes and resting intervals shall not allow the passage of a sphere more than 1/2 inch (13 mm) in diameter. Advisory 1018.6 Openings. ...
-
1132A.4, Item 2
wood decking with spaces) shall be the same level as the interior landing, except that secondary exterior doors may have no more than ½ inch (12.7 mm) of change in height between floor surfaces...
-
1018.6 Openings
Openings in the surface of beach access routes and resting intervals shall not allow the passage of a sphere more than 1/2 inch (13 mm) in diameter. Advisory 1018.6 Openings....
-
502.6 Identification
Signs shall be 60 inches (1525 mm) minimum above the finish floor or ground surface measured to the bottom of the sign....
-
11B-411.2.1.5.1 Size
Buttons shall have square shoulders, be 3/4 inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding surface...
-
1132A.4, Item 2
wood decking with spaces) shall be the same level as the interior landing, except that secondary exterior doors may have no more than ½ inch (12.7 mm) of change in height between floor surfaces...
