Section-by-Section Analysis) This section proposes that, where ICT provides data connections used for input and output, at least one of each type of data connection conform to industry standard...
Search Results "ISO: International Organization for Standardization"
-
406.1 General (Section-by-Section Analysis)
-
412.1.1 Digital Television Tuners
Where audio description is played through digital television tuners, the tuners shall conform to ATSC A/53 Digital Television Standard, Part 5 (2010) (incorporated by reference in Chapter...
-
Are stairway chairlifts permitted?
No, stairway chairlifts cannot be used where platform lifts are permitted by the ADA Standards (§206.7) although they are addressed by the ASME A18.1 Standard....
-
Do basements count in determining a facility’s story count?
As defined in the Standards, a “story” pertains to those portions of buildings “designed for human occupancy included between the upper surface of a floor and upper surface of the floor...
-
101.1.3
101.1.3 This code establishes standards for accessibility to places of public accommodation and commercial facilities by individuals with disabilities....
-
Emphasis on Limitations Instead of Outcomes
organization representing educational institutions opposing them....
-
12112(b)(3)
(3) utilizing standards, criteria, or methods of administration--...
-
12112(b)(3)
(3) utilizing standards, criteria, or methods of administration...
-
304 Turning Space
304 Turning Space Section 4.2.3 of the 1991 Standards and Section 304.3 of the 2010 Standards allow turning space to be either a circular space or a T-shaped space....
-
Issue 16: What environmental and perceptual data on artificial/electric lighting are available from buildings with low vision occupants?
Is this [RP 28-07 ANSI/IES Standard: Lighting and the Visual Environment for Senior Living] based on some hard data research that was done? Response by Eunice Noell-Waggoner....
-
R101 Purpose (Section-by-Section Analysis)
When the guidelines are adopted, with or without additions and modifications, as accessibility standards in regulations issued by other federal agencies implementing Title II of the Americans...
-
11B-216.1 General
[2010 ADA Standards] 216.1 General. Signs shall be provided in accordance with 216 and shall comply with 703. Exceptions: 1....
-
AJW Architectural Products U592 1.6 Gallon Sanitary Napkin Disposal w/ Keyed Access Panel & Mounted Shelf - Surface Mounted
International Graphic Symbol (IGS) available on request. NDL-13: Waxed disposable liners. (50 per Case)...
-
AJW Architectural Products U593 1.6 Gallon Sanitary Napkin Disposal w/ Mounted Shelf - Surface Mounted
International Graphic Symbol (IGS) available on request....
-
Voluntary Voting System Guidelines
The Federal Election Commission published the Performance and Test Standards for Punchcard, Marksense and Direct Recording Electronic Voting Systems in 1990....
-
"Housing at a place of education" definition
Place of Education,’’ and has revised Sec. 35.151(f) to reflect the accessible features that now will be required in addition to the requirements set forth under the transient lodging standards...
-
Water Closet Location and Rear Grab Bar
Section 604.2 of the 2010 Standards allows greater flexibility for the placement of the centerline of wheelchair accessible and ambulatory accessible water closets....
-
M201.2 General Exception (Section-by-Section Analysis)
The MDE NPRM did not propose a general exception for diagnostic equipment that was not capable of meeting the MDE Standards. As described in Section IV.A.1....
-
H. Men's Spa and Fitness Center Locker Room
and Fitness Center Locker Room: (1) Defendants will install a vertical, self-operating lift in the Men's Spa whirlpool in order to permit access for persons with disabilities. 2010 Standards...
-
Path of travel
(DOT ADA Regulation 49 C.F.R. 37.43(a)(2) and DOT ADA Standard 202.3.)...
-
Space Allowance and Reach Ranges [4.2]
Adult dimensions and measures for standard manual wheelchairs form the basis of many ADAAG specifications....
-
Assumptions
Assumptions Two industry standard specifications are used to determine the safety and accessibility of each surface: ASTM F1292‒99/04 Standard Specification for Impact Attenuation of...
-
The SmartWheel
The SmartWheel has been accepted as a measurement tool for the ASTM PS 83 - 97/F1951 Standard on Playground Surface Accessibility....
-
Is vertical access required to all levels of a parking garage?
The Standards require that an accessible route connect each story in “multi-story” facilities but include certain exceptions based on the number of stories or the square footage per floor...
