4.30.6 Mounting Location and Height. Where permanent identification is provided for rooms and spaces, signs shall be installed on the wall adjacent to the latch side of the door....
Search Results "Tactilely Discernible"
-
4.30.6 Mounting Location and Height
-
A4.30 Signage
[See subsections ...]
-
4.1.3(16) Building Signage
(16) Building Signage:
-
4.30 Signage
[See subsections ...]
-
4.30.1* General
Signage required to be accessible by 4.1 shall comply with the applicable provisions of 4.30.
-
Signage [4.30]
Signage [4.30] The Society for Environmental Graphic Design (SEGD) has prepared guidance in applying ADAAG signage requirements based on certain industry conventions. This...
-
SIGNAGE
[See subsections ...]
-
F216 Signs
[See subsections ...]
-
703 Signs
[See subsections ...]
-
4.30.1* GENERAL
Signage required to be accessible by 4.1 shall comply with 4.30.
-
4.30.6 MOUNTING LOCATION AND HEIGHT
Interior signage shall be located alongside the door on the latch side and shall be mounted at a height of between 54 in and 66 in (1370 mm and 1675 mm) above the finished floor.
-
4.30 SIGNAGE
[See subsections ...]
-
A.4.30 SIGNAGE
[See subsections ...]
-
11B-216 Signs.
[See subsections ...]
-
11B-703 Signs
11B-703 Signs.
-
11B-216 Signs
[See subsections ...]
-
11B-703 Signs
[See subsections ...]
-
Line Spacing: ADA Standard Section 703.5.9
Spacing between the baselines of separate lines of characters within a message shall be 135 percent minimum and 170 percent maximum of the character height.
-
11B-703.5.9 Line spacing
Spacing between the baselines of separate lines of characters within a message shall be 135 percent minimum and 170 percent maximum of the character height.
-
11B-703.5.9 Line spacing
Spacing between the baselines of separate lines of characters within a message shall be 135 percent minimum and 170 percent maximum of the character height.
- Access Board: Tactile Sign Scoping
- How Blind People Find Braille Signs
-
11B-703.1.1.2 Inspection
Signs and identification devices shall be field inspected after installation and approved by the enforcing agency prior to the issuance of a final certificate of occupancy per...
-
11B-703.1.1.2 Inspection
11B-703.1.1.2 Inspection. Signs and identification devices shall be field inspected after installation and approved by the enforcing agency prior to the issuance of a final...