[See subsections ...]
Search Results "Roll-In Shower"
Filters
Commonly Searched Documents
-
11B-608.5.1 Reserved
-
4.34.5.6 BATHTUB AND SHOWER ENCLOSURES
Enclosures for bathtubs or shower stalls shall not obstruct controls or transfer from wheelchairs onto shower or bathtub seats....
-
1134A.6, Item 2
The maximum slope of the shower floor shall be Β½ inch (12.7 mm) per foot in any direction and shall slope to a drain....
-
1134A.6, Item 2
The maximum slope of the shower floor shall be Β½ inch (12.7 mm) per foot in any direction and shall slope to a drain....
-
4.26 Handrails, Grab Bars, and Tub and Shower Seats
[See subsections ...]
-
A4.26 Handrails, Grab Bars, and Tub and Shower Seats
[See subsections ...]
-
4.26 HANDRAILS, GRAB BARS, AND TUB AND SHOWER SEATS
[See subsections ...]
-
A4.26 HANDRAILS, GRAB BARS, AND TUB AND SHOWER SEATS
[See subsections ...]
-
11B-608.3.1 Reserved
[See subsections ...]
-
1g
g. Is there a horizontal grab bar on the wall opposite the seat as shown in Figure 37(a) above? [ADA Stds. 4.21.4; Fig. 37] Yes __ No __ N/A __ Comments:...
-
Seat [4.21.3]
Seat [4.21.3] ADAAG specifies maximum seat dimensions. Minimum dimensions contained in the CABO-ANSI A117.1β1992 standard are acceptable. The seat must extend the full depth of...
-
Bobrick Two-Wall Tub/Shower Toilet Compartment Grab Bar B-5837
36" W x 54" D (91 x 137cm), 1-1/4" (32mm) dia. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm) thick, type 304...
-
Bobrick Two-Wall Tub/Shower Toilet Compartment Grab Bar B-68137
36" W x 54" D (91 x 137cm), 1-1/2" (38mm) dia. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm) thick, type 304...
-
6. Grab Bar
Is there a horizontal grab bar on the wall opposite the seat for stabilization and aid in maneuvering while in a shower wheelchair?...
-
11B-809.10.6 Showers
Showers required by Section 11B-809.10 shall comply with this section....
-
Access Board: Transfer Type Shower Compartments
This video is part of a longer animation produced by the U.S. Access Board. View the animation video in its entirety on the Access Board's website...
-
Collapsible Water Retainer Shower Dam for Shower Threshold
Collapsible Water Retainer Shower Dam for shower threshold (roll-in wheelchair showers and accessible shower stall) Excellent shower water stopper for keeping the bathroom floor dry and...
-
Bobrick Two-Wall Tub/Shower Toilet Compartment Grab Bar Peened B-68137.99
36" W x 54" D (91 x 137cm), 1-1/2" (38mm) dia., peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm)...
-
Bobrick Two-Wall Tub/Shower Toilet Compartment Grab Bar Peened B-5837.99
36" W x 54" D (91 x 137cm), 1-1/4" (32mm) dia., peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm)...
-
4.21.2 Size and Clearances
Minimum guidelines for roll-in shower stalls are based on residential size fixtures (30" x 60" minimum or the space used by a standard residential tub/shower unit) and spaces (30" minimum...
-
11B-604 Water closets and toilet compartments
INTERPRETATION Showers are fixtures including a 30 inch x 60 inch clear receptor with a minimum/maximum slope of ΒΌ inch per foot to a drain (refer to CPC Section 408.5 and CBC Section...
-
608.1 General
Shower compartments shall comply with 608. Advisory 608.1 General....
-
608.1 General
Shower compartments shall comply with 608. Advisory 608.1 General....
-
1014.1 General
The technical requirements address the entrance to camp shelters (1014.2), including transfer access (1014.2.1) and roll-in access (1014.2.2); and the floor within camp shelters (1014.3)...
