Armrests M302.3.2 Armrests are recommended but not required. If provided armrests cannot interfere with transfer supports during the transfer. Dual transfer support/armrest...
Search Results "Positioning Aids"
-
Armrests M302.3.2
-
M305.2.1 Location
Transfer supports shall be located within reach of the transfer surface and shall not obstruct transfer onto or off of the surface when in position....
-
17 Inch Low Height
17 Inch Low Height A portion of the Committee maintained that a height range of 17 inches - 25 inches would accommodate a significant portion of people with disabilities. Data...
-
A4.10.13 Car Position Indicators
A special button may be provided that would activate the audible signal within the given elevator only for the desired trip, rather than maintaining the audible signal in constant...
-
A4.10.13 CAR POSITION INDICATORS
A special button may be provided that would activate the audible signal within the given elevator only for the desired trip, rather than maintaining the audible signal in constant...
-
12102(4)(E)(i)(III)
(III) reasonable accommodations or auxiliary aids or services; or...
-
2.1.4 Issues
In this new standard, the high frequency average (HFA) gain in the microphone position of the hearing aid is explicitly compared to both simulated telephone and induction coil usage (Preves...
-
Are health care providers required to treat all persons with HIV or AIDS, regardless of whether the treatment being sought is within the provider’s area of expertise?
Are health care providers required to treat all persons with HIV or AIDS, regardless of whether the treatment being sought is within the provider’s area of expertise? No....
-
§ 35.108(d)(4)(iii)
(iii) Reasonable modifications or auxiliary aids or services as defined in this regulation;...
-
11B-1010.1 Turning space
A circular turning space 60 inches (1524 mm) diameter minimum with slopes not steeper than 1:48 shall be provided at shooting facilities with firing positions....
-
1010.1 Turning Space
A circular turning space 60 inches (1525 mm) diameter minimum with slopes not steeper than 1:48 shall be provided at shooting facilities with firing positions....
-
1010.1 Turning Space
A circular turning space 60 inches (1525 mm) diameter minimum with slopes not steeper than 1:48 shall be provided at shooting facilities with firing positions....
-
11B-1010.1 Turning space
A circular turning space 60 inches (1524 mm) diameter minimum with slopes not steeper than 1:48 shall be provided at shooting facilities with firing positions....
-
11B-1010.1 Turning space
A circular turning space 60 inches (1524 mm) diameter minimum with slopes not steeper than 1:48 shall be provided at shooting facilities with firing positions....
-
H. MISCELLANEOUS
Per 28 CFR § 36.303(c)(1), the Cavs shall furnish appropriate auxiliary aids and services where necessary to ensure effective communication with individuals with disabilities....
-
§1630.2(j)(5)(iii)
(iii) Reasonable accommodations or “auxiliary aids or services” (as defined by 42 U.S.C. 12103(1));...
-
5.1.4 Transfer Surface Height Measurement for M301 and M302
Having an accessible transfer surface height is critical to facilitate independent patient transfers to equipment used by patients both in a supine, side-lying, or prone and seated position...
-
1010.1 Turning Space
A circular turning space 60 inches (1525 mm) diameter minimum with slopes not steeper than 1:48 shall be provided at shooting facilities with firing positions. ...
-
III-4.3100 General
A public accommodation is required to provide auxiliary aids and services that are necessary to ensure equal access to the goods, services, facilities, privileges, or accommodations that...
-
Auxiliary Aids and Services
Auxiliary Aids and Services mm....
-
M301.2.2 Sunset
The low transfer position height, Item A of M301.2.1, shall cease to have effect on [Insert date 5 years after date of publication in the Federal Register]....
-
2.1.3 Receivers
2.1.3 Receivers The major advantage of IL systems is that they permit listeners whose hearing aids incorporate telecoils to use their own hearing aids as the receiver....
-
5.4.1 Transfer Support Location for M301 and M302
Provisions require transfer supports be provided for use with the transfer sides and be located within reach of the transfer surface and not obstruct transfer onto the surface when in position...
-
III-4.3000 Auxiliary aids
[See subsections ...]