buildings equipped throughout with an automatic sprinkler system installed in accordance with Section 903.3.1 or 903.3.1.2, the elevator shall not be required on floors provided with a horizontal...
Search Results "Horizontal Projection"
Filters
Commonly Searched Documents
-
1009.2.1 Elevators required
-
11B-404.2.4.3 Recessed doors and gates
approach shall be provided when any obstruction within 18 inches (457 mm) of the latch side at an interior doorway, or within 24 inches (610 mm) of the latch side of an exterior doorway, projects...
-
3. REQUIREMENT TO COMPLY:
Projects not requiring DSA approval (i.e., exempt projects) shall comply with all currently effective design, construction, and inspection provisions of the California Code of Regulations...
-
5.4.5.1 Transfer and Positioning Support Position Recommendation for Imaging Equipment
On imaging equipment with transfer surfaces, the transfer or positioning support must be oriented horizontally....
-
11B-505.10.3 Bottom extension at stairs
At the bottom of a stair flight, handrails shall extend at the slope of the stair flight for a horizontal distance equal to one tread depth beyond the last riser nosing. ...
-
Egress, Means of
A means of egress comprises vertical and horizontal travel and may include intervening room spaces, doorways, hallways, corridors, passageways, balconies, ramps, stairs, enclosures, lobbies...
-
11B-903.6 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
2. DESIGN PROFESSIONAL IN GENERAL RESPONSIBLE CHARGE STATMENT
DESIGN PROFESSIONAL IN GENERAL RESPONSIBLE CHARGE STATEMENT: The drawing sheet delineating the Path of Travel (POT) for a project shall include the following statement: "Design Professional...
-
11B-406.5.1 Location
Curb ramps and the flared sides of curb ramps shall be located so that they do not project into vehicular traffic lanes, parking spaces, or parking access aisles....
-
HANDRAIL
A horizontal or sloping rail intended for grasping by the hand for guidance or support....
-
HANDRAIL
A horizontal or sloping rail intended for grasping by the hand for guidance or support....
-
HANDRAIL
A horizontal or sloping rail intended for grasping by the hand for guidance or support....
-
Slope Ratio
Slope Ratio—A ratio of vertical distance to horizontal distance or rise to run....
-
2.2 Path of Travel Exterior Elements
2.2 Path of Travel Exterior Elements: In addition to the five specific items listed above, the path of travel also includes an exterior approach to the project area....
-
11B-505.10.3 Bottom extension at stairs
At the bottom of a stair flight, handrails shall extend at the slope of the stair flight for a horizontal distance equal to one tread depth beyond the last riser nosing....
-
11B-407.3.1 Type
Elevator doors shall be the horizontal sliding type. Car gates shall be prohibited....
-
407.3.1 Type
Elevator doors shall be the horizontal sliding type. Car gates shall be prohibited....
-
407.3.1 Type
Elevator doors shall be the horizontal sliding type. Car gates shall be prohibited....
-
11B-407.3.1 Type
Elevator doors shall be the horizontal sliding type. Car gates shall be prohibited....
-
11B-407.3.1 Type
Elevator doors shall be the horizontal sliding type. Car gates shall be prohibited....
-
Back Support: ADA Standard Section 903.4
Back support shall be 2½ inches (64 mm) maximum from the rear edge of the seat measured horizontally. Advisory 903.4 Back Support....
-
1.5 Accessible Route Requirements for Campus Settings
The following factors may apply to projects on existing campus facilities: • New construction on an existing site must be connected, as part of the basic project scope, with an accessible...
-
3.1.1. Total Number of U.S Auditoriums (2015)
Digital Projection System Analog Projection System Total Indoor 38,688 650 39,338...
-
11B-202 Existing buildings and facilities
INTERPRETATION The phrase "projects consisting only of " shall be understood to allow work that is incidental to projects covered under Section 11B-202.4, Exception 7....