Changes in level between 1/4 inch (6.4 mm) and 1/2 inch (12.7 mm) shall be beveled with a slope no greater than one unit vertical in 2 units horizontal (50-percent slope) [see Figure 11B...
Search Results "Beveled"
-
1124B
-
4. Comparison of Proposed Technical Provisions Applicable to Shared Use Paths and AASHTO Guide
Vertical surface discontinuities between 6.4 mm (0.25 in) and 13 mm (0.5 in) shall be beveled with a slope not steeper than 50 percent....
-
Corbin Russwin Inc. ED5000 Series Exit Device
significantly resists pull from the exterior, thus reducing door and frame separation, preventing the door from being forced open. 900 series heavy-duty trim deters vandals with a thick 13/16" beveled...
-
Willoughby Industries 2260 AquaDeck Lavatory Deck Contoured Front
AquaDeck lavatory decks can be ordered with Bullnosed or Beveled front edge styles instead of standard square-eased edges and/or 31" rim heights for juvenile use (JR)....
-
Allegion Schlage CS200-Series Mechanical Locks with Tubular Interconnect
Hand information is necessary to ensure proper cylinder orientation in keyed functions, and finish of latchbolt and strike for locks that are to be installed on reverse bevel doors....
-
Ramps M303:3.3, 3.3.1, 3.3.2
Level changes between ¼ inch high and ½ inch high would be required to be beveled with a slope not steeper than 1:2....
-
2. Follow the Accessibility Standards for Play Areas
• Changes in level between ¼ inch high minimum and ½ inch high maximum shall be beveled with a slope not steeper than 1:2....
-
Cal-Royal Pioneer SL / CSL Series Cylindrical Lockset
LATCH FACEPLATE -2 1/4" x 1 1/8" adjustable for flat or beveled doors 1/8" in 2", for 2 3/4" backset. Optional 2 1/4" x 1" for 2 3/8" backset....
-
Cal-Royal Products Grade 1 Cylindrical Lockset Calypso CAL Series
LATCH FACEPLATE - 2 1/4" x 1 1/8" adjustable for flat or beveled doors 1/8" in 2", for 2 3/4" backset. Optional 2 1/4" x 1 1/8" for 2 3/8" backset....
-
Cal-Royal Genesys Series Grade 1 Heavy Duty Cylindrical Leversets
GND750 deadlatch reversible for flat and beveled door. 3/4" throw anti-friction deadlatch for pair of fire doors....
-
Accessibility - Flatness and Lippage
Cushioned or beveled - edge tiles can minimize the effects of lippage....
-
Allegion Schlage ND Series Mechanical Locks
Faceplate: Brass, bronze or stainless steel. 1 1/8” x 2 1/4” (29 mm x 57mm) square corner, beveled. Lock Chassis: Zinc plated for corrosion resistance....
-
Construction and Maintenance Practices
Building entries must be within ¼ inch (6.4 millimeters) of being flush with the grade of the outside access route and have a beveled doorsill that isn't more than ½ inch (13 millimeters...
-
6. Recognize that Proper Installation of Play Surface Systems is Key
Site plans and construction drawings should provide details like maximum running slopes and cross slopes, beveled edges, transitions, adjoining seams and affixing the surface material to...
-
FIGURE INDEX
Graphic Convention for Figures Figure 302.2 Carpet Pile Height Figure 302.3 Elongated Openings in Floor or Ground Surfaces Figure 303.2 Vertical Change in Level Figure 303.3 Beveled...
-
Changes in Level within a Dwelling Unit
Changes in level within the dwelling unit with heights between 1/4 inch and 1/2 inch are beveled with a slope no greater than 1:2....
