Wheelchair accessible compartments shall be 60 inches (1525 mm) wide minimum measured perpendicular to the side wall, and 56 inches (1420 mm) deep minimum for wall hung water closets and...
Search Results "Hinge Side Clearance"
-
604.8.1.1 Size
-
604.8.1.1 Size
Wheelchair accessible compartments shall be 60 inches (1525 mm) wide minimum measured perpendicular to the side wall, and 56 inches (1420 mm) deep minimum for wall hung water closets and...
-
Technical Memorandum TM 2012-01 Electric Vehicle Charging Stations
The vehicle space(s) with the accessible charging station shall be at least 96 inches wide and shall provide a 36 inch wide (minimum) accessible route complying with TAS 402 on both sides...
-
5.9.2.1 Standing Supports on Single Ramped Entry Raised Platforms with Wheelchair Spaces Recommendations
5.9.2.1 Standing Supports on Single Ramped Entry Raised Platforms with Wheelchair Spaces Recommendations The Committee recommends standing supports located on both sides of platforms,...
-
604.8.1.1 Size
Wheelchair accessible compartments shall be 60 inches (1525 mm) wide minimum measured perpendicular to the side wall, and 56 inches (1420 mm) deep minimum for wall hung water closets and...
-
11B-604.8.1.1 Size
Wheelchair accessible compartments shall be 60 inches (1524 mm) wide minimum measured perpendicular to the side wall, and 56 inches (1422 mm) deep minimum for wall hung water closets and...
-
Part 1. Typical Issues for Voters Who Use Wheelchairs, Scooters or Other Mobility Aids
Ramps with a vertical rise of more than 6 inches must have handrails on both sides....
-
Sinks [4.24]
At those used briefly or intermittently, a side approach may be sufficient. A removable base cabinet can be used to make a sink adaptable for a forward approach....
-
3. FIXTURES and HARDWARE
Shelves: “If the clear floor space allows a parallel approach by a person in a wheelchair and the distance between the wheelchair and the shelf exceeds 10 inches, the maximum high side...
-
Features of Accessible Parking Spaces
Access aisles may be located on either side of the parking space except for angled van parking spaces which must have access aisles located on the passenger side of the parking spaces....
-
11B-406.5.3 Landings
The landing clear width shall be at least as wide as the curb ramp, excluding any flared sides, or the blended transition leading to the landing....
-
11B-407.4.1 Car dimensions
TABLE 11B-407.4.1 ELEVATOR CAR DIMENSIONS MINIMUM DIMENSIONS DOOR LOCATION Door clear width Inside car, side...
-
1023.9 Stairway identification signs
sign, raised characters and braille floor identification signs that comply with Chapter 11B shall be located at the landing of each floor level, placed adjacent to the door on the latch side...
-
1. Public Right-of-Way
Street ("Fillmore") and Steiner Street ("Steiner"); (2) Steiner between Grove Street ("Grove") and Fulton; and (3) the east side of 19th Street one block north of Wawona Street....
-
Just Manufacturing Classroom Concealed Ledgemount Teardrop Handle Faucet
Triple radius swing spout with 10" clearance. Heavey cast spout cone for added strength. Replaceable seats. Brass quarter turn stem units....
-
PEMKO 5" Latching Panic Saddle Threshold No. 2005-P
Allow 3/8" door clearance....
-
Just Manufacturing Concealed Classroom Faucet with Triple Radius Spout
Triple radius swing spout with 10" clearance. Heavey cast spout cone for added strength. Replaceable seats. Brass quarter turn stem units....
-
PEMKO 5" Latching Panic Saddle Threshold No. 2005-V
Allow 3/8" door clearance....
-
Re: Service Counters
CBC 11B-904.4 does not contain any qualifying language that separates the differing requirements between the employee and customer sides of the counter because this information is contained...
-
Section 1.0 Background
The analysis was limited to WhMD dimensions, minimum clear floor areas, space requirements for maneuvering, knee and toe clearances, and reach limits....
-
Eliason Corporation FP-ALU5R Heavy Duty Aluminum Mid-Panel Door
Bottom Rail Tube: 6-1/2" Corner Joint Assembly: 3/8" Tie rod thru spline Corner Joint Construction: Mortise and tenon Door Thickness: 1-3/4" FP-ALU5 Specifications Lock and Hinge...
-
Gamco Coverall Recessed Towel Dispenser - TD-6
Door is mounted to cabinet with continuous stainless steel piano-hinge and is fitted with tumbler lock. All welded construction. Capacity: 300 C-fold or 400 multi-fold towels....
-
Gamco Recessed Coverall Combination Towel Dispenser and Waste Receptacle - TW-9-4
Door is mounted to cabinet with continuous stainless steel piano-hinge and fitted with two tumbler locks. Capacity: 600 C-fold, 800 Multi-fold, or 1100 single-fold towels. ...
-
11B-404.2.7 Door and gate hardware
Where sliding doors are in the fully open position, operating hardware shall be exposed and usable from both sides....
