Where an element of a path of travel (such as a sidewalk, pedestrian ramp, passageway between platforms, staircase, escalator, etc.) in an existing facility is itself the subject of alteration...
Search Results "Ramp Width"
-
Conclusion
-
Boarding Pier Clearances
For example, at a launch ramp, if a 20-foot accessible boarding pier is provided, the entire 20 feet must comply with the pier clearance requirements....
-
O. Accessible Portable Toilets
For the entrance to an accessible portable toilet to be usable, there must either be no step or a ramp must be installed that extends extends from the hinge side of the door to at least...
-
(a) Single-story dwelling units
However, split-level entries or areas will need ramps or other means of providing an accessible route....
-
Angled Van Spaces
This is the side from which ramps and lifts typically deploy....
-
11B-108 Maintenance of accessible features.
It is not sufficient to provide features such as accessible routes, parking, elevators, ramps or signage if those features are not maintained in a manner that enables individuals with disabilities...
-
11B-108 Maintenance of accessible features
It is not sufficient to provide features such as accessible routes, parking, elevators, ramps or signage if those features are not maintained in a manner that enables individuals with disabilities...
-
Stanley Access Technologies Dura-Care 7000 Manual Door System
Narrow | OPTION: Medium BOTTOM RAILS: 4" | OPTION: 6", 8", 10", 12", Custom HEADER SIZE: 4” (102mm) High x 4-1/2” (114mm) Deep TYPICAL HEIGHT: 88" | OPTION: Taller Available TYPICAL WIDTH...
-
Blue Ridge Independent Living Center (BRILC) - Roanoke and Christianburg, VA
In addition to assisting individuals to locate affordable/accessible housing, we sometimes have funding available to complete home modifications such as grab bars, ramps, etc....
-
Addendum C: Participant responses to two step transfers for protocols D and E
Adjacent Transfer/Two Step Transfer with Ramp Participant Remarks Participants that Did Not Attempt the Transfers...
-
BRW1000 Bariatric Wheelchair Scale Demo
The digital BRW1000 scale features a low-profile platform with two-way integral ramps for efficient bariatric wheelchair loading....
-
809.2.2 Turning Space
EXCEPTION: Turning space shall not be required in exterior spaces 30 inches (760 mm) maximum in depth or width. Advisory 809.2.2 Turning Space....
-
Sections 505.10.2 and 505.10.3
The requirement in the 1991 Standards that handrails extend horizontally at least 12 inches beyond the width of one tread at the bottom of a stair was changed in the 2004 ADAAG by the Access...
-
Sharing an Access Aisle
Requirements for access aisles in section 502.3 address width, length, marking, and location. Two spaces are permitted to share an access aisle....
-
809.2.2 Turning Space
EXCEPTION: Turning space shall not be required in exterior spaces 30 inches (760 mm) maximum in depth or width. Advisory 809.2.2 Turning Space....
-
5.3.2 Transfer Sides Recommendations for M301
The transfer surface shall be located to provide options to transfer from a mobility device onto one short side (depth) and one long side (width) of the surface....
-
809.2.2 Turning Space
EXCEPTION: Turning space shall not be required in exterior spaces 30 inches (760 mm) maximum in depth or width. Advisory 809.2.2 Turning Space....
-
Showers
Several commenters requested that the final Guidelines provide dimensions on the appropriate width and height of showers and shower doors....
-
In-swinging Bathroom Doors
Once a minimum door width is provided, a tenant who finds a bathroom not readily usable can have the door rehung as an outswinging door....
-
Other Sources
The Access Board used anthropometric data and other standards for the width of transfer surfaces on diagnostic equipment used by patients in a seated position (see M302.2.2), height of breast...
-
Designed Use
For example, on a trail with Managed Uses of all-terrain vehicle and Motorcycle, all-terrain vehicle use would be the Designed Use because this use requires wider tread widths and has lower...
-
Sargent 8888 Reversible Rim Exit Device
The 8888 is designed for standard width stile applications on wood and metal doors and has 7 functions determined by the trim function....
-
Inpro Corporation JointMaster® 441 Series-Recessed Mount Expansion Joint
cover plate finishes available Exposed fastener for easy maintenance Key Specifications Floor/Floor, Floor/Wall Conditions Movement: +/- 50% Joint width...
-
Inpro Corporation JointMaster® DR Series Seal Expansion Joint Systems
linear waviness Installation not weather sensitive Utilizes lubricant adhesive (JPR004) Key Specifications: Architectural Compression Seals Joint width...
