for Platform Lifts and Stairway Chairlifts 1109.8, Table 3001.3 [2010 ADA Standards] 105.2.2 ASME....
Search Results "Standards Development"
Filters
Commonly Searched Documents
-
ASME
-
Section 36.103 Relationship to Other Laws (Preamble, Section-by-Section Analysis)
Paragraph (a) provides that, except as otherwise specifically provided by this part, the ADA is not intended to apply lesser standards than are required under title V of the Rehabilitation...
-
Site Selection
Sites constructed after the ADA was passed should generally meet the ADA’s facility standards....
-
Title III Readily Achievable Barrier Removal
an existing pool, removing barriers may involve installation of a fixed pool lift with independent operation by the user or other accessible means of entry that complies with the 2010 Standards...
-
Accessible Teeing Grounds, Putting Greens, and Weather Shelters
Sections 238.2 and 1006.4 of the 2010 Standards require that golf cars be able to enter and exit each putting green and weather shelter....
-
Accessible Route to Play Components
Section 206.2.17 of the 2010 Standards provides scoping requirements for accessible routes to ground level and elevated play components and to soft contained play structures....
-
Overview
March 15, 2012, is also the compliance date for using the 2010 Standards for new construction, alterations, program accessibility, and barrier removal....
-
Minimum Clear Opening
Representatives Edwards, Frank, and Fish expressed their support for the Option One specification on minimum clearance which is consistent with the ANSI Standard....
-
Water Closet Clearances
The Department gave careful consideration to the costs and benefits of its adoption of the standards relating to water closet clearances in single-user toilet rooms....
-
3.3.2 Unoccupied Device Length
The unoccupied lengths of devices used for the “reference wheelchair” described in the U.S. standard equals the average value obtained from our overall sample....
-
Water Closet Clearances
The Department gave careful consideration to the costs and benefits of its adoption of the standards relating to water closet clearances in single-user toilet rooms....
-
F101 Purpose
What standards must Federal agencies meet in providing architectural and interior design services?...
-
National Network of ADA Centers
confusion for not coming to a low height number was the fact that a high number was never clearly factored into the discussions, nor was the distance of movement of 8” The proposed standards...
-
Intent
CBC) Chapter 11B - Accessibility to Public Accommodations, Commercial Buildings and Public Housing, but it includes and compares requirements of Americans with Disabilities Act Title II (Standards...
-
1 - Design and drawing
1 - Design and drawing Current practice It is typical practice for architects to use the values published in guidelines and standards and repeat the values on the drawings....
-
Intent
Accessibility to Public Buildings, Public Accommodations, Commercial Buildings and Public Housing, but it includes and compares requirements of Americans with Disabilities Act Title II (Standards...
-
Section 36.204 Administrative Methods (Preamble, Section-by-Section Analysis)
Section 36.204 Administrative Methods Section 36.204 specifies that an individual or entity shall not, directly, or through contractual or other arrangements, utilize standards or criteria...
-
Section 36.311 Mobility Devices (Section-by-Section Analysis)
If a facility complies with the applicable design requirements in the 1991 Standards or the 2010 Standards, the public accommodation will not be required to exceed those standards to accommodate...
-
Van Accessible Parking Spaces
The 1991 Standards, at sections 4.1.2 (5)(b), 4.6.3, 4.6.4, and 4.6.5, require one in every eight accessible parking spaces to be van accessible....
-
Section 35.151(d) Scope of coverage
Although the Department may use the requirements of the 2010 Standards as a guide to determining when and how to make equipment and furnishings accessible, those determinations fall within...
-
M101.6 Dimensional Tolerances (Section-by-Section Analysis)
manufacturers and one medical association) indicated that tolerances vary based on the manufacturer, product design, and manufacturing process and that they are unaware of any industry standard...
-
T603.5 Securement Systems for Rear-Facing Wheelchair Positions
accessible transport vehicles designed for use by both sitting and standing passengers — Part 1: Systems for rearward facing wheelchair-seated passengers, First Edition, June 5, 2012 [ISO Standard...
-
9. I already purchased a portable lift before March 15, 2012. Can I still use it?
If you have purchased a non-fixed lift before March 15th that otherwise complies with the requirements in the 2010 Standards for pool lifts (such as seat size, etc.), you may use it, as...
-
Overview
Throughout this NPRM, the current, legally enforceable ADA Standards will be referred to as the "1991 Standards." 28 CFR part 36, App....