The fire-resistance-rated construction shall extend vertically from the ground to a point not less than 10 feet (3048 mm) above the floor level of the area for assisted rescue or to the...
Search Results "Ground Transportation"
-
1009.7.2 Separation
-
11B-1008.2.3 Water play components
Exceptions: Where the surface of the accessible route, clear floor or ground spaces, or turning spaces serving water play components is submerged, compliance with Sections 11B-302,...
-
11B-1008.2.3 Water play components
Exceptions: Where the surface of the accessible route, clear floor or ground spaces, or turning spaces serving water play components is submerged, compliance with Sections 11B-302,...
-
Section 37.167 Other Service Requirements
Service animals shall always be permitted to accompany their users in any private or public transportation vehicle or facility....
-
X. Alterations
The architectural standards for accessibility in alterations are contained in the ADA Accessibility Guidelines issued by the Architectural and Transportation Barriers Compliance Board....
-
§ 382.7 General prohibition of discrimination
through contractual, licensing, or other arrangements: (1) Discriminate against any otherwise qualified individual with a disability, by reason of such disability, in the provision of air transportation...
-
QUESTION: IF A PLATFORM IS OWNED BY A PRIVATE ENTITY OTHER THAN THE PASSENGER RAILROAD, WHAT HAPPENS IF THE PRIVATE ENTITY OBJECTS TO THE CREATION OF A LEVEL BOARDING PLATFORM?
station, section 37.49(e) provides that the passenger railroad operator is the “responsible person” for complying with the requirements of Subpart C of Part 37 (the subpart concerning transportation...
-
Employee Training
382.61(a)] Carriers must provide training to proficiency in the requirements of the ACAA and its implementing regulations and other DOT and FAA regulations affecting the provision of air transportation...
-
Comments
In addition, these commenters said, there might be cases in which operators, while unable to provide transportation from Point A to Point B, would be able to provide transportation from...
-
Access for Persons with Disabilities to Passenger Vessels and Shore Facilities
Disabilities to Passenger Vessels and Shore Facilities The Impact of the Americans with Disabilities Act of 1990 FINAL REPORT, July 12, 1996 Prepared for: The Office of the Secretary of Transportation...
-
11B-404.2.9 Door and gate opening force
surface and the centerline of the second push plate shall be 30 inches (762 mm) minimum and 44 inches (1118 mm) maximum above the floor or ground surface....
-
11B-404.2.9 Door and gate opening force
surface and the centerline of the second push plate shall be 30 inches (762 mm) minimum and 44 inches (1118 mm) maximum above the floor or ground surface....
-
§382.95(a)
This assistance must include, as needed, the services of personnel and the use of ground wheelchairs, accessible motorized carts, boarding wheelchairs, and/or on-board wheelchairs where...
-
11B-803.6 Mirrors
Mirrors shall be installed with the bottom edge of the reflecting surface 20 inches (508 mm) maximum above the finish floor or ground....
-
Problem One (Protruding Objects)
Problem One: Objects, such as branches and ceiling-mounted televisions, over a route are lower than 80 inches above the ground or floor....
-
11B-306.3.4 Clearance reduction
Between 9 inches (229 mm) and 27 inches (686 mm) above the finish floor or ground, the knee clearance shall be permitted to reduce at a rate of 1 inch (25 mm) in depth for each 6 inches...
-
11B-612.2 Bench
Exception: A readily removable bench shall be permitted to obstruct the turning space required by Section 11B-612.3 and the clear floor or ground space required by Section 11B-903.2....
-
STEP 2 Determine what is needed
Table 240.2.1.2 establishes a minimum level of ground level play components required to be on an accessible route, based on the number of elevated play components provided....
-
404.2.7 Door and Gate Hardware
Operable parts of such hardware shall be 34 inches (865 mm) minimum and 48 inches (1220 mm) maximum above the finish floor or ground....
-
404.2.7 Door and Gate Hardware
Operable parts of such hardware shall be 34 inches (865 mm) minimum and 48 inches (1220 mm) maximum above the finish floor or ground....
-
11B-306.3.4 Clearance reduction
Between 9 inches (229 mm) and 27 inches (686 mm) above the finish floor or ground, the knee clearance shall be permitted to reduce at a rate of 1 inch (25 mm) in depth for each 6 inches...
-
11B-803.6 Mirrors
Mirrors shall be installed with the bottom edge of the reflecting surface 20 inches (508 mm) maximum above the finish floor or ground....
-
11B-306.3.4 Clearance reduction
Between 9 inches (229 mm) and 27 inches (686 mm) above the finish floor or ground, the knee clearance shall be permitted to reduce at a rate of 1 inch (25 mm) in depth for each 6 inches...
-
11B-612.2 Bench
Exception: A readily removable bench shall be permitted to obstruct the turning space required by Section 11B-612.3 and the clear floor or ground space required by Section 11B-903.2....