The surface of the bottom tread shall extend to a water depth of 18 inches (457 mm) minimum below the stationary water level. Advisory 11B-1009.5.4 Transfer steps....
Search Results "Extended Floor Surface"
Filters
Commonly Searched Documents
-
11B-1009.5.4 Transfer steps
-
CRL PR40 Series Adjustable Spring Power Surface Mounted Door Closers
08 7100 CRL DC50 Series ANSI Grade 1 Surface Mounted Door Closers Applicable for Doors Ranging From 26" to 54" Wide and 33 to 264 Pounds Dual Valve Closing and Latching Speed Control...
-
11B-602.9 Pedestrian protection
When used, wing walls or barriers shall project horizontally at least as far as the drinking fountain and to within 6 inches (152 mm) vertically from the floor or ground surface....
-
Features of Accessible Exam Tables
Removable/adjustable support rails with continuous gripping surfaces 2. 30” X 48” minimum clear floor space adjacent to exam table and adjoining accessible route 3....
-
Do basements count in determining a facility’s story count?
As defined in the Standards, a “story” pertains to those portions of buildings “designed for human occupancy included between the upper surface of a floor and upper surface of the floor...
-
ADA Compliant Plumbing Products for Accessible Kitchens and Baths - CEU Course
Ergonomics. Technology. ADA regulations. The delivery of water raises a variety of design issues and opportunities. Delta Faucet Company now offers several AIA-approved...
-
Detectable Warning Surfaces on Boarding Platforms Used by Buses and Rail Vehicles, and Boarding and Alighting Areas Used by Rail Vehicles (Section-by-Section Analysis)
Detectable Warning Surfaces on Boarding Platforms Used by Buses and Rail Vehicles, and Boarding and Alighting Areas Used by Rail Vehicles (Section-by-Section Analysis) The 1991 ADAAG...
-
903.4 Back Support
Back support shall be 42 inches (1065 mm) long minimum and shall extend from a point 2 inches (51 mm) maximum above the seat surface to a point 18 inches (455 mm) minimum above the seat...
-
903.4 Back Support
Back support shall be 42 inches (1065 mm) long minimum and shall extend from a point 2 inches (51 mm) maximum above the seat surface to a point 18 inches (455 mm) minimum above the seat...
-
29. Please indicate what the length of time was between the installation of the trail surface material and the first necessary repair
Please indicate what the length of time was between the installation of the trail surface material and the first necessary repair: 1 month 3 months 6 months...
-
1008.3.1.2 Height
The height of transfer platforms shall be 11 inches (280 mm) minimum and 18 inches (455 mm) maximum measured to the top of the surface from the ground or floor surface....
-
Toilet Buildings and Pit Toilets
The depth of the clear space is measured from the back of the riser and extends in front of the riser (figure 110)....
-
1009.5.4 Transfer Steps
The surface of the bottom tread shall extend to a water depth of 18 inches (455 mm) minimum below the stationary water level. Advisory 1009.5.4 Transfer Steps....
-
11B-812.7.2 Marking
The color of the borderlines, hatched lines, and letters shall contrast with that of the surface of the access aisle....
-
11B-505.10 Handrail extensions
Handrail gripping surfaces shall extend beyond and in the same direction of stair flights and ramp runs in accordance with Section 11B-505.10....
-
b. Exception for Base Support Allowance and Unobstructed Knee and Toe Space
, which can extend to a height of 4 inches above the floor at a depth of 28 inches....
-
Sloan Optima® EHD-401 Sensor Activated Hand Dryer for Surface Mounting
EHD-401 Sensor Activated Hand Dryer for Surface Mounting Features Automatically operates by means of an Infrared Optical Sensor with 90-second lockout feature...
-
1124B
Surfaces for wheelchair spaces. Clear floor or ground spaces for wheelchairs shall comply with Section 1124B Ground and Floor Surfaces....
-
Lavatory & Accessory Layouts
The trash receptacle is preferred to be near the door to allow people to pull the door open with a paper towel and drop it into the receptacle before exiting.
-
Jacknob Corp. 9099 ADA Latch & Keeper Surface-Mounted Partition Door Hardware
9099 Latch & Keeper-Surface Mounted-ADA (6049-Bob Style) CRSS Satin Stainless Steel...
-
Willoughby Industries ETW-1490-FM-HC Floor Mount Wall Outlet Rear Mounted ADA Blow Out Type Flush Toilet
The construction shall be all welded, with exposed stainless surfaces polished to a #4 satin finish....
-
4.34.5.5(2) Seat
The seat shall be 17 in to 19 in (430 mm to 485 mm) high measured from the bathroom floor and shall extend the full depth of the stall....
-
Bradley Surface Mounted Tank-Type Vertical Valve Soap Dispenser 6562
Tank Type Vertical; Surface-Mounted; ADA Compliant Product Materials BODY: 20 gauge stainless steel with exposed surfaces in architectural satin finish....
-
Bradley Surface Mounted, Horizontal Tank, Horizontal Valve Soap Dispenser 6542
Tank Type Horizontal; Surface-Mounted; ADA Compliant Product Materials BODY: 20 gauge stainless steel with exposed surfaces in architectural satin finish....
