M305 in the final rule provides the technical requirements for transfer supports, standing supports, leg supports, and head and back supports. Transfer supports are required for...
Search Results "Designated Aisle Seat (Assembly)"
-
M305 Supports (Section-by-Section Analysis)
-
M305 Supports
[See subsections ...]
-
Submerged Depth: ADA Standard Section 1009.2.8
The lift shall be designed so that the seat will submerge to a water depth of 18 inches (455 mm) minimum below the stationary water level....
-
11B-1009.2.8 Submerged depth
The lift shall be designed so that the seat will submerge to a water depth of 18 inches (457 mm) minimum below the stationary water level....
-
11B-1009.2.8 Submerged depth
The lift shall be designed so that the seat will submerge to a water depth of 18 inches (457 mm) minimum below the stationary water level....
-
T207.4.2. Large vehicles
Handholds or stanchions shall be provided within large non-rail vehicles on all forward- and rear-facing seat backs located directly adjacent to the aisle....
-
Problem One
Solution: Find a relatively level parking area near the accessible entrance and then designate the area for accessible parking spaces and adjacent access aisles. ...
-
Problem One
Suggestion: Find a relatively level parking area near the accessible entrance and then designate the area for accessible parking spaces and adjacent access aisles....
-
General: ADA Standard Section 803.1
Partitions and doors should be designed to ensure people using accessible dressing and fitting rooms privacy equivalent to that afforded other users of the facility....
-
Assistive Listening Systems
In the final rule, the Board has added an exception for assembly areas where all seats are served by an induction loop system (219.3, Exception 2)....
-
1607.8 Loads on handrails, guards, grab bars shower seats, dressing room bench seats and seats
[See subsections ...]
-
§382.61(b)
(b) You are not required to provide movable armrests on aisle seats of rows which a passenger with a mobility impairment is precluded from using by an FAA safety rule....
-
§382.97(c)(2)
(2) Internal barriers are present in the aircraft that would preclude passengers who use a boarding or aisle chair from reaching a non-exit row seat....
-
§27.72(e)(3)(ii)
(ii) Internal barriers are present in the aircraft that would preclude passengers who use a boarding or aisle chair from reaching a non-exit row seat....
-
Clear Floor or Ground Space: ADA Standard Section 1008.4.2
Where play components include a seat or entry point, designs that provide for an unobstructed transfer from a wheelchair or other mobility device are recommended....
-
11B-1008.4.2 Clear floor or ground space
Where play components include a seat or entry point, designs that provide for an unobstructed transfer from a wheelchair or other mobility device are recommended....
-
11B-1008.4.2 Clear floor or ground space
Where play components include a seat or entry point, designs that provide for an unobstructed transfer from a wheelchair or other mobility device are recommended....
-
Kohler C3® 200 Elongated Bidet Toilet Seat With In-line Heater and Remote Control
This advanced C3 toilet seat with bidet functionality uses naturally soothing water as a refreshing, hygienic alternative to toilet tissue....
-
§ 36.406(f)(4)
(4) In stadium-style movie theaters, wheelchair spaces and companion seats are located on a riser or cross-aisle in the stadium section that satisfies at least one of the following criteria...
-
Wheelmill System Informational Design Video
Requires the Registered User plan or above. Login! -
Designing Sidewalks and Trails for Access, Part II of II: Best Practices Design Guide
Department of Transportation / Beneficial Designs, Inc....
-
4.8.5* Handrails
Handrails are not required on curb ramps or adjacent to seating in assembly areas. Handrails shall comply with 4.26 and shall have the following features:...
-
11B-803.1 General
Partitions and doors should be designed to ensure people using accessible dressing and fitting rooms privacy equivalent to that afforded other users of the facility....
-
11B-803.1 General
Partitions and doors should be designed to ensure people using accessible dressing and fitting rooms privacy equivalent to that afforded other users of the facility....
