Each grab bar shall be installed 15 inches (380 mm) maximum from the head end wall and 12 inches (305 mm) maximum from the control end wall. [ECTCR UFAS 4.34.5.4(3), Fig. 48(b)]...
Search Results "User Control"
Filters
Commonly Searched Documents
-
607.4.1.1 Back Wall
-
703.4.1 Height above Finish Floor or Ground
[ECTCR UFAS 4.30.6] EXCEPTION: Tactile characters for elevator car controls shall not be required to comply with 703.4.1....
-
604.9.6 Dispensers
Dispensers shall not be of a type that controls delivery or that does not allow continuous paper flow....
-
Set the Automatic Volume Adjustment
If volumes are adequate in quiet conditions, but do not increase enough or quickly enough when ambient noise increases, the microphone sensitivity, or automatic gain control, may need to...
-
11B-607.4.2.1 Back wall
Each grab bar shall be 24 inches (610 mm) long minimum and shall be installed 24 inches (610 mm) maximum from the head end wall and 12 inches (305 mm) maximum from the control end wall....
-
607.4.2.1 Back Wall
Each grab bar shall be 24 inches (610 mm) long minimum and shall be installed 24 inches (610 mm) maximum from the head end wall and 12 inches (305 mm) maximum from the control end wall....
-
28.1 Q. If an architect or builder chooses to follow the bathroom specifications in Requirement 7...are the other bathrooms in the dwelling unit required to have reinforced walls for grab bars?
The same would be true for other Requirements in the Guidelines, such as Requirement 5, which applies to usable light switches, electrical outlets, thermostats and other environmental controls...
-
608.2.2.1 Clearance
EXCEPTION: A lavatory complying with 606 shall be permitted on one 30 inch (760 mm) wide minimum side of the clearance provided that it is not on the side of the clearance adjacent to the controls...
-
407.2 Contrast (Section-by-Section Analysis)
407.2 Contrast (Section-by-Section Analysis) This section proposes that keys and controls, where provided, contrast visually from background surfaces....
-
E202.4 ICT Functions Located in Maintenance or Monitoring Spaces
When indicators and operable parts for ICT functions are located in maintenance or monitoring spaces but they are operated remotely, the remote controls or interfaces would also not be permitted...
-
Rehabilitation Act Amendments
mandate presumptive employability, meaning applicants should be presumed to be employable unless proven otherwise, and state that eligible individuals must be provided choice and increased control...
-
Information technology (Preamble, Section-by-Section Analysis)
the Clinger-Cohen Act, that is, any equipment or interconnected system or subsystem of equipment, that is used in the automatic acquisition, storage, manipulation, management, movement, control...
-
11B-407.2.1.4 Location
A destination-oriented elevator system provides lobby controls enabling passengers to select floor stops, lobby indicators designating which elevator to use, and a car indicator designating...
-
11B-703.5.6 Height from finish floor or ground
Exceptions: Visual characters indicating elevator car controls shall not be required to comply with Section 11B-703.5.6....
-
11B-607.4.2.1 Back wall
Each grab bar shall be 24 inches (610 mm) long minimum and shall be installed 24 inches (610 mm) maximum from the head end wall and 12 inches (305 mm) maximum from the control end wall....
-
EVAC+CHAIR® 300H (MK-4) Evacuation Chair
Standard model EVAC+CHAIR® 300H, The Original evacuation stair chair designed to allow a safe controlled descent of an individual from unlimited stories....
-
American Standard Sycamore 1-Handle Pull-Out Kitchen Faucet 7073.100
Ceramic Disc Valve Cartridge: Assures smooth, precise valve control and a lifetime of drip-free, maintenance-free performance....
-
Guardian Barrier-Free Eyewash: Deck Mounted, AutoFlow™ 90º Swing-Down GBF1849
Eyewash outlet assembly is lowered and extended to permit access by wheelchair user. ADA compliance is dependent on 27” knee clearance under counter and 34” maximum counter height....
-
[2010 ADAS] 105.2.1 ANSI/BHMA
Included are provisions intended to reduce the chance of user injury or entrapment....
-
Manufacturer (Section-by-Section Analysis)
For the purposes of these guidelines, a manufacturer is the entity which makes a product for sale to a user or to a vendor who sells to a user....
-
1. Number of TTYs
In order to provide equal access to TTY users, every call-taking position within the PSAP must have its own TTY or TTY-compatible equipment.3 PSAPs must have systems that enable call takers...
-
TICKETING
, and, if asked, the location of all available accessible seating must be identified; Tickets for accessible seating must be available at all price levels; A wheelchair user...
-
Accessible Surfaces Located In The Use Zone
It is predicted that a user would fall and land or exit the equipment on the surface of the use zone....
