(c) For purposes of this subpart, occupied by at least one person 55 years of age or older means that on the date the exemption for housing designed for persons who are 55 years of age or...
Search Results "Design Guideline"
Filters
Commonly Searched Documents
-
§100.305(c) Occupied by at least one person 55 years of age or older
-
Can hall and in-car signals be displayed horizontally (i.e., side-by-side) instead of vertically (i.e., one above the other)?
However, with call buttons, the button designating the up direction must be located above the one indicating the down direction (§407.2.1.4)....
-
PLATFORM (WHEELCHAIR) LIFT
A hoisting and lowering mechanism equipped with a car or platform or support that serves two landings of a building or structure and is designed to carry a passenger or passengers and/or...
-
§ 37.17(b)(1)
(1) The process for filing a complaint, including the name, address, telephone number, and email address of the employee designated under paragraph (a) of this section, must be sufficiently...
-
§ 35.171(a)(1)(ii)
(ii) If the agency does not have section 504 jurisdiction, it shall promptly determine whether it is the designated agency under subpart G of this part responsible for complaints filed against...
-
§ 37.17(b)(1)
(1) The process for filing a complaint, including the name, address, telephone number, and email address of the employee designated under paragraph (a) of this section, must be sufficiently...
-
11B-243.1 General
Where shooting facilities with firing positions are designed and constructed at a site, at least 5 percent, but no fewer than one, of each type of firing position shall comply with Section...
-
§ 35.151(j)(1)
(1) Residential dwelling units designed and constructed or altered by public entities that will be offered for sale to individuals shall comply with the requirements for residential facilities...
-
§ 37.131(a)(2)(ii)
(ii) At end stations and other stations in outlying areas, the entity may designate circles with radii of up to 11/2 miles as part of its service area, based on local circumstances....
-
11B-1002.5.2 Transfer height
The height of amusement ride seats designed for transfer shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
§ 37.3 Wheelchair
Wheelchair means a mobility aid belonging to any class of three- or more-wheeled devices, usable indoors, designed or modified for and used by individuals with mobility impairments, whether...
-
11B-243.1 General
Where shooting facilities with firing positions are designed and constructed at a site, at least 5 percent, but no fewer than one, of each type of firing position shall comply with Section...
-
11B-1002.5.2 Transfer height
The height of amusement ride seats designed for transfer shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
PLATFORM (WHEELCHAIR) LIFT
A hoisting and lowering mechanism equipped with a car or platform or support that serves two landings of a building or structure and is designed to carry a passenger or passengers and/or...
-
[ADA Title III §36.104] 1991 Standards
[ADA Title III §36.104] 1991 Standards means requirements set forth in the ADA Standards for Accessible Design, originally published on July 26, 1991, and republished as Appendix D to this...
-
Minimum Rear Wall Required.
It appears that this comment references the 2010 ADA Standards for Accessible Design for minimum bench length (42") but uses the CA - 2013 minimum bench length (48") to develop the minimum...
-
TownSteel CDC-110 Classroom Instruder Mechanical Cylindrical
It's designed to meet the need of Classroom Security Solutions which aids school facilities to provide a safe and secure environment....
-
Side Entry: ADA Standard Section 1002.4.4.2
Where wheelchair spaces are entered only from the side, amusement rides shall be designed to permit sufficient maneuvering clearance for individuals using a wheelchair or mobility aid to...
-
11B-411.2.2.2 Verbal identification
When the accessibility function button is pressed, verbal announcement of the car designation shall be provided at the elevator car entrance upon arrival....
-
11B-1002.4.4.2 Side entry
Where wheelchair spaces are entered only from the side, amusement rides shall be designed to permit sufficient maneuvering clearance for individuals using a wheelchair or mobility aid to...
-
Aluminum Heavy Duty Wheels n' Heels® InVent Grating
A slip resistant surface is recommended to meet ADA guidelines. Also available in Stainless Steel upon request....
-
ADA Solutions, Inc. Cast in Place Tactile Surface
sizes: 24" x 36", 24" x 48", 24" x 60", 36" x 48" and 36" x 60" All of our truncated dome tactile surfaces are in full compliance with the American Disabilities Act Accessibility Guidelines...
-
Sargent FM7100 Multi-Point Auto Deadlocking Door System
Facilities and Government Facilities Features & Benefits Robust multi-point auto deadlocking system Both inswing and outswing applications UL approved to FEMA 361 and FEMA 320 guidelines...
-
Inclusion Solutions Functional Needs Support Services (FNSS) Shelter Tool Kit
Our Shelter Toolkit matches the ADAAG guidelines for shelters together with a proven solution, taking the hard work out of compliance....
