Subcommittee members felt that the definitions should be based on how the device is defined by manufacturer as follows: Manufacturers design examination tables with primary functions...
Search Results "Design Guideline"
-
Introduction
-
Side Entry Openings, and Width and Length of Wheelchair Space
Side Entry Openings, and Width and Length of Wheelchair Space If the wheelchair space can only be entered from the side, the ride must be designed to permit sufficient turning space for...
-
Tool-tips on images
Often tool-tip style use for alt-text is done because of a lack of space, or because designers think the minimalist design looks less cluttered....
-
6. DOCUMENTATION
DoD Component Heads shall ensure that each contract, grant, or loan for the design, construction, or alteration of a facility subject to these DoD Standards and each lease for a facility...
-
A4.23.3 Clear Floor Space
The specific shower shown is designed to fit exactly within the dimensions of a standard bathtub....
-
4.16.3 Height
All of the institutional designs included a raised toilet within the 17"-19" range allowed by ADAAG....
-
Construction and Manufacturing Tolerances
This applies to field work, not design work. Tolerances necessary for a particular manufacturing process are also permitted....
-
§ 37.3 Station
intercity or commuter rail transportation is operated, where such portion is used by the general public and is related to the provision of such transportation, including passenger platforms, designated...
-
Shopping Center/Mall
The facility housing a "shopping center or shopping mall" only includes floor levels housing at least one sales or rental establishment, or any floor level designed or intended for use by...
-
1009.12 Alarms/emergency warning systems/accessibility
Emergency warning systems provided as part of the fire-alarm system and two-way communication systems required by Chapter 10 shall be designed and installed in accordance with NFPA 72 as...
-
11B-308.4 Suggested reach ranges for children
Where building elements such as coat hooks, lockers, or operable parts are designed for use primarily by children, the suggested dimensions of Table 11B-308.4 shall be permitted....
-
11B-812.8.7 Location
Signs identifying van accessible vehicle spaces shall contain the designation “van accessible.”...
-
1009.12 Alarms/emergency warning systems/two-way communication systems
Emergency warning systems provided as part of the fire alarm system and two-way communication systems required by Chapter 10 shall be designed and installed in accordance with NFPA 72 as...
-
11B-308.4 Suggested reach ranges for children
Where building elements such as coat hooks, lockers, or operable parts are designed for use primarily by children, the suggested dimensions of Table 11B-308.4 shall be permitted....
-
Transfer Systems: ADA Standard Section 1008.3
Designers should minimize the distance between the points where a child transfers from a wheelchair or mobility device and where the elevated play components are located....
-
11B-812.8.7 Location
Signs identifying van accessible vehicle spaces shall contain the designation “van accessible.”...
-
Shared Use Path
Shared use paths are designed for use by bicyclists and pedestrians, including pedestrians with disabilities....
-
11B-810.1.1 Vehicle boarding
Stations shall not be designed or constructed so as to require persons with disabilities to board or alight from a vehicle at a location other than one used by the general public....
-
1991 Standards
1991 Standards means requirements set forth in the ADA Standards for Accessible Design, originally published on July 26, 1991, and republished as Appendix D to this part....
-
M303.2.1 Orientation
Wheelchair spaces shall be designed so that a patient seated in a wheelchair orients in the same direction that a patient not seated in a wheelchair orients when the diagnostic equipment...
-
1133A.2.1, Item 3
All other kitchen designs shall provide a minimum clear width of at least 48 inches (1219 mm). (See Figure 11A-10A)....
-
11B-234.4.1 Load and unload areas
Where load and unload areas serving existing amusement rides are newly designed and constructed, the load and unload areas shall comply with Section 11B-1002.3....
-
Self-Service Storage
Building or facility designed and used for the purpose of renting or leasing individual storage spaces to customers for the purpose of storing and removing personal property on a self-service...
-
Sec. 469.151(a)(2)
(2) the owner of the building or facility for which a request for a waiver or modification is made, or the owner's designated agent, presents proof to the commission that compliance with...