Where speech output cannot be supported due to constraints in available memory or processor capability, ICT shall be permitted to conform to 409 in lieu of 402.2. 4....
Search Results "Building Permit"
-
402.2 Speech-Output Enabled
-
711.3.1 Through penetrations
Exception: Where the penetrating items are steel, fer- rous or copper pipes or steel conduits, the annular space between the penetrating item and the fire-resistance- rated wall shall be permitted...
-
Was the carrier correct in asking me to take a seat other than a bulkhead seat in the emergency exit row?
The carrier was within its rights to refuse to permit you to sit in the bulkhead seat with your service animal, because the service animal may have blocked access to the emergency exit....
-
408.4.1 Car Dimensions and Doors
Cars that provide a clear width 51 inches (1295 mm) minimum shall be permitted to provide a clear depth 51 inches (1295 mm) minimum provided that car doors provide a clear opening 36 inches...
-
11B-502.3.4 Location
Access aisles shall be permitted to be placed on either side of the parking space except for van parking spaces which shall have access aisles located on the passenger side of the parking...
-
404.2.3 Doorways - Clear Width
In alterations, a projection of 5/8 inch (16 mm) maximum into the required clear width shall be permitted for the latch side stop. 2....
-
407.12.3.2.2 Knee and Toe Space
Toe space shall be permitted to provide a clear height of 9 inches (230 mm) minimum above the floor and a clear depth of 6 inches (150 mm) maximum from the vertical reference plane toward...
-
Openings in Trail Surfaces
Openings up to a half of an inch (13 millimeters) across are permitted in trail surfaces....
-
404.2.3 Doorways - Clear Width
In alterations, a projection of 5/8 inch (16 mm) maximum into the required clear width shall be permitted for the latch side stop. 2....
-
11B-502.3.4 Location
Access aisles shall be permitted to be placed on either side of the parking space except for van parking spaces which shall have access aisles located on the passenger side of the parking...
-
11B-1002.2 Accessible routes
In load or unload areas and on amusement rides, where compliance with Section 11B-405.2 _|Slope|_ is not structurally or operationally feasible, ramp slope shall be permitted to be 1:8 maximum...
-
11B-1009.2.7 Operation
The lift shall be stable and not permit unintended movement when a person is getting into or out of the seat. [2010 ADAS] 1009.2.7 Operation....
-
11B-404.2.3 Clear width
In alterations, a projection of 5/8 inch (15.9 mm) maximum into the required clear width shall be permitted for the latch side stop. 2....
-
11B-1008.2.3 Water play components
Accessible routes serving water play components shall be permitted to use the exceptions in Section 11B-1008.2.3....
-
11B-1002.2 Accessible routes
Exceptions: In load or unload areas and on amusement rides, where compliance with Section 11B-405.2 is not structurally or operationally feasible, ramp slope shall be permitted...
-
11B-404.2.3 Clear width
Exceptions: In alterations, a projection of 5/8 inch (15.9 mm) maximum into the required clear width shall be permitted for the latch side stop....
-
11B-502.3.4 Location
Access aisles shall be permitted to be placed on either side of the parking space except for van parking spaces which shall have access aisles located on the passenger side of the parking...
-
Required Compliance [§206.6]
In facilities not required to have an accessible route between stories or to mezzanines (see the Accessible Routes guide), a limited-use/ limited-application (LULA) elevator is permitted...
-
Hager Companies Three Knuckle - Half Mortise Swing Clear Hinge AB7511
Description: - For square edge doors - ANSI A8221 - Non-rising removable pin with flush pin and plug - Reversible - For use in hospitals or other institutional type buildings...
-
Hager Companies Three Knuckle - Half Mortise Swing Clear Hinge AB7512
Description: - For beveled edge doors - ANSI A8221 - Non-rising removable pin with flush pin and plug - Reversible - For use in hospitals or other institutional type buildings...
-
Hager Companies Three Knuckle - Full Mortise Swing Clear Hinge AB7501
Description: - For square edge doors - ANSI A8121 - Non-rising removable pin with flush pin and plug - Reversible - For use in hospitals or other institutional type buildings...
-
Hager Companies Five Knuckle - Full Mortise Swing Clear Hinge BB1362
ANSI A5121 - For square edge doors - Non-rising removable pin with button tip and plug - Four ball bearings - Reversible - For use in hospitals or other institutional type buildings...
-
Hager Companies Five Knuckle - Full Surface Swing Clear Hinge BB1266
ANSI A8321 - Beveled surface leaves - Non-rising removable pin with button tip and plug - Four ball bearings - Reversible - For use in hospitals or other institutional type buildings...
-
Hager Companies Five Knuckle - Half Mortise Swing Clear Hinge BB1265
ANSI A8221 - For beveled edge doors - Non-rising removable pin with button tip and plug - Four ball bearings - Reversible - For use in hospitals or other institutional type buildings...
