Clear floor spaces 30 inches (762 mm) by 48 inches (1219 mm), with centerlines aligned with the centerline of the work surface, appliance, sink or fixture, shall be provided in the following...
Search Results "Wheelchair Space (Medical Diagnostic Equipment)"
-
11B-809.9.1 Clear floor space
-
11B-809.9.1 Clear floor space
Clear floor spaces 30 inches (762 mm) by 48 inches (1219 mm), with centerlines aligned with the centerline of the work surface, appliance, sink or fixture, shall be provided in the following...
-
Magnuson Group RIGA Series Waste Receptacle
Designed by JM Massana and JM Tremoleda, RIGA is a family of waste receptacles offering various size capacities and that includes a combination ash/trash unit as well as a matching...
-
Plumbing/Restrooms
PLUMBING/RESTROOMS Turning space within the room 11B-603 Door swing not in clear floor space of any fixture (except...
-
For small parking lots, is there any variance on being able to share EV charging with the existing accessible parking spaces?
RESPONSE: The accessibility provisions in CBC Chapter 11B do not permit a required accessible EVCS to be installed in a required accessible parking space....
-
5.1.9 Doors
The door shall not swing into or otherwise obstruct the clear floor or ground space or the turning space required by 5.1.4. ...
-
Sec.36.211 Maintenance of accessible features
Sec.36.211 Maintenance of accessible features.
-
M305.3.3 Fittings
Standing supports shall not rotate within their fittings.
-
M302.2.4 Transfer Sides
Options to transfer from a mobility device shall be provided on two adjoining sides of transfer surfaces. EXCEPTION: Options to transfer to or from a mobility device onto...
-
M305.3.3 Fittings (Section-by-Section Analysis)
The MDE NPRM proposed to prohibit standing supports from rotating in their fittings. There were no comments on this section and it was not addressed by the MDE Advisory Committee....
-
5.2.3 Transfer Surface Measurement
5.2.3 Transfer Surface Measurement. The transfer surface should be measured from the center-point of each side of the transfer surface.
-
5.3.3.1 Transfer Sides for Exam Chairs with Fixed Footrests
5.3.3.1 Transfer Sides for Exam Chairs with Fixed Footrests. The 17 inch minimum depth and 21 inch minimum width should be located on both sides of examination chairs with a fixed...
-
5.2.3 Transfer Surface Measurement Recommendation for M301 and M302
5.2.3 Transfer Surface Measurement Recommendation for M301 and M302 Description: The transfer surface size standard has two components: width and depth. The transfer surface...
-
5.3.3.1 Transfer Sides Recommendation for Exam Chairs with Fixed Footrests
5.3.3.1 Transfer Sides Recommendation for Exam Chairs with Fixed Footrests Some examination chairs have footrests that get in the way of entry from the foot end, such as dental...
-
C206 Support Documentation and Services
[See subsections ...]
-
§ 36.211 Maintenance of accessible features.
[See subsections ...]
-
C206 Support Documentation and Services (Section-by-Section Analysis)
C206 Support Documentation and Services (Section-by-Section Analysis) This is an introductory section.
-
D. Functional Performance Criteria and Technical Requirements (Section-by-Section Analysis)
Appendix C sets forth proposed functional performance criteria (Chapter 3) and technical requirements (Chapters 4 through 6) that are referenced by, and applied in, the Application...
-
C206 Support Documentation and Services
[See subsections ...]
-
M302.2.3 Transfer Sides
The transfer surface shall be located to provide options to transfer from a mobility device onto one short side (depth) and one long side (width) of the surface. Each transfer side...
-
M305.3.3 Fittings
Standing supports shall not rotate within their fittings.
-
5.4.1.1 Transfer Support Location Recommendation for Stretchers
(see Figure 5.4.1.1) Figure 5.4.1.1 Transfer Support Location – Plan View (SOURCE: Stryker Medical)...
-
Approach and Maneuvering Clearance [§305.6 and §305.7]
Approach and Maneuvering Clearance [§305.6 and §305.7] Where the space is obstructed on both sides for more than half the depth, additional clearance is required for maneuvering....
