As a result, toilet room configuration and location of the water closet were the critical design considerations in assisted transfers....
Search Results "Securement Location"
Filters
Commonly Searched Documents
-
4.16.2 Clear Floor Space
-
4.5.1 General
In alterations, where a condition for exception in section 1.1 prohibits full compliance with a specific requirement for clear floor or ground space surface, slope, size, or location, the...
-
What constitutes a “passenger loading zone”?
At other locations, compliance is not required even if passenger loading may occasionally occur, but is not specifically intended or reflected in the design....
-
11B-604.7.1 Dispensers
The outlet of the dispenser shall be below the grab bar, 19 inches (483 mm) minimum above the finish floor and shall not be located behind grab bars....
-
11B-806.3.2 Notification devices
Telephones shall be served by an electrical outlet complying with Section 11B-309 located within 48 inches (1219 mm) of the telephone to facilitate the use of a TTY....
-
11B-604.7.1 Dispensers
The outlet of the dispenser shall be below the grab bar, 19 inches (483 mm) minimum above the finish floor and shall not be located behind grab bars....
-
11B-703.6.1 Pictogram field
Characters and Braille shall not be located in the pictogram field. Advisory 11B-703.6.1 Pictogram field....
-
11B-606.6 Adjacent side wall or partition
Lavatories, when located adjacent to a side wall or partition, shall be a minimum of 18 inches (457 mm) to the centerline of the fixture....
-
11B-806.3.2 Notification devices
Telephones shall be served by an electrical outlet complying with Section 11B-309 located within 48 inches (1219 mm) of the telephone to facilitate the use of a TTY....
-
11B-307.4 Vertical clearance
The leading edge of such guardrail or barrier shall be located 27 inches (686 mm) maximum above the finish floor or ground....
-
Comfort Designs Tamper Proof Anti-ligature Grab Bars
Suicide-resistant No space between wall and bar Installed in healthcare and correctional facilities across the USA The only security bar to allow full grip...
-
Gamco Surface-Mounted Double Robe Hook Satin - 76727
Flange and support arm shall be 22 gauge (0.8mm) and equipped with a concealed, 18-gauge (1.2mm) mounting bracket that is secured to a concealed, 19‑gauge (1.0mm) wall plate with a stainless...
-
Gamco Surface-Mounted Sanitary Napkin Disposal - ND-1
Cover is drawn, one-piece construction; secured to cabinet with full-length stainless steel piano-hinge. Capacity: 1.0-gal. (3.8-L)....
-
Bobrick Vandal-Resistant Clothes Hook B-983
Secured from the front. Type 304 satin-finish stainless steel. Back plate is 14‑gauge (2mm). Hook snaps down for safety if excessively loaded....
-
Landscape Forms Inc. Presidio Bench Collection
tubular steel frames Backed or backless Backed seats on curved runs may face inside or outside the circle Optional tubular steel arms welded to seats: one or two per seat Seats bolt securely...
-
Horton HD-Storm™ 70/80/85 PSF Belt Drive
Envelope — Highest PSF Rating The new hurricane rated HD-Storm™ sliding door system offers the highest pounds per square foot (PSF) rating available on the market along with the extra security...
-
BEST B.A.S.I.S.® V Door Lever Hardware with Card Reader
The system is designed to secure your facility by granting specific access rights to authorized personnel, based on a defined time schedule for each lock in the system....
-
AJW Architectural Products U374 Paper Cup Dispenser - Surface Mounted
Product Features Fabricated of #22 gauge stainless steel with a #4 satin finish Dispenser holds 150 3 oz cups Secured with pin tumbler lock, keyed like all AJW cabinets Made...
-
Bobrick Folding Shower Seat B-517
SAFETY WARNING: Shower seats are no stronger than the anchors and walls to which they are attached and must be firmly secured in order to support the loads for which they are intended....
-
Bobrick Folding Shower Seat B-518
SAFETY WARNING: Shower seats are no stronger than the anchors and walls to which they are attached and must be firmly secured in order to support the loads for which they are intended....
-
BEA Inc. Indoor & Outdoor Door Entry Keypads
They are ideal for integration into security systems with electromagnetic locks, electric strikes, restricted access elevators or gates and other types of equipment requiring on/off or momentary...
-
5. Grievance Procedure
The City also installed curb ramps at all the locations alleged in the pleadings. RT 1392:3-16....
-
Detectable Warnings
safety concerns, the Board, along with the Department of Justice (DOJ) and the Department of Transportation (DOT), suspended the requirement for detectable warnings at curb ramps and other locations...
-
TownSteel MSE-32-II Classroom Intruder with Indicator on Inside Mechanical Mortise
Available in three types Labels - "SECURE/UNSECURE", "OCCUPIED/VACANT", and " LOCKED/UNLOCKED. Both clutched and non-clutched mortise chassis are available....
