Accessibility also includes the appropriate designation and location of spaces and passenger loading zones, their connection to an accessible route, and vertical clearance for vans....
Search Results "Securement Location"
Filters
Commonly Searched Documents
-
Parking and Passenger Loading Zones [4.6]
-
Integration
Where wheelchair seating areas are located next to busy circulation areas, barriers may be advisable to prevent crowd overflow....
-
5.3.1 General
Pit toilets may only be provided in FS recreation sites with a Recreation Site Development Scale level of 2 or less or at remote cabin locations....
-
M302.2.3 Transfer Sides
The transfer surface shall be located to provide options to transfer from a mobility device onto one short side (depth) and one long side (width) of the surface....
-
Recessed Objects
If located to provide, but not exceed this clearance (27” above the floor or ground absolute), they are not protruding objects because the leading edge will be within cane detection....
-
Are stairway chairlifts permitted?
Platform lifts can be equipped with seats, including those that fold, but they must be located outside the minimum clear area specified for platforms which are sized to accommodate wheeled...
-
E. GRIEVANCE PROCEDURE
Consent Decree, the County will adopt the attached ADA Grievance Procedure, Attachment C, distribute it to all of its agencies, post it on its website, and post copies of it in conspicuous locations...
-
18. Hard-to-Maneuver Stops
A passenger's request to be picked up in a location that is difficult, but not impossible or impracticable, to access should generally be granted as long as picking up the passenger does...
-
11B-505.5 Clearance
Handrails may be located in a recess if the recess is 3 inches (76 mm) maximum deep and 18 inches (457 mm) minimum clear above the top of the handrail. [2010 ADAS] 505.5 Clearance. ...
-
18. Hard-to-Maneuver Stops
A passenger's request to be picked up in a location that is difficult, but not impossible or impracticable, to access should generally be granted as long as picking up the passenger does...
-
11B-505.5 Clearance
Handrails may be located in a recess if the recess is 3 inches (76 mm) maximum deep and 18 inches (457 mm) minimum clear above the top of the handrail....
-
11B-603.6 Guest room toilet and bathing rooms
Toilet and bathing rooms within guest rooms that are not required to provide mobility features complying with Section 11B-806.2 shall provide all toilet and bathing fixtures in a location...
-
1009.6.4 Separation
Areas of refuge located within an enclosure for interior exit stairways complying with Section 1023. 2....
-
11B-208.2 Minimum number
Accessible spaces can be provided in other facilities or locations, or, in the case of parking structures, on one level only when equal or greater access is provided in terms of proximity...
-
Issue: Historically Significant Facilities
If no accessibility changes are made at these facilities and locations, individuals with disabilities are unable to visit and participate in the programs offered....
-
Issue 3: Which signal? Speech WALK messages necessary
With two APS located closer than five feet to each other, it is impossible to distinguish which one is sounding based on the location and direction of the sound....
-
R208.1 Where Required
Detectable warning surfaces complying with R305 shall be provided at the following locations on pedestrian access routes and at transit stops: 1....
-
407.12 Reach Height (Section-by-Section Analysis)
Proposed 407.12 parallels existing 508 Standards § 1194.25(j), which applies side reach requirements to ICT that is “freestanding, non-portable, and intended to be used in one location.”...
-
11B-208.2 Minimum number
Accessible spaces can be provided in other facilities or locations, or, in the case of parking structures, on one level only when equal or greater access is provided in terms of proximity...
-
Gamco Surface-Mounted Double Robe Hook Satin - 76727
Flange and support arm shall be 22 gauge (0.8mm) and equipped with a concealed, 18-gauge (1.2mm) mounting bracket that is secured to a concealed, 19‑gauge (1.0mm) wall plate with a stainless...
-
Bobrick Vandal-Resistant Clothes Hook B-983
Secured from the front. Type 304 satin-finish stainless steel. Back plate is 14‑gauge (2mm). Hook snaps down for safety if excessively loaded....
-
Gamco Surface-Mounted Sanitary Napkin Disposal - ND-1
Cover is drawn, one-piece construction; secured to cabinet with full-length stainless steel piano-hinge. Capacity: 1.0-gal. (3.8-L)....
-
Comfort Designs Tamper Proof Anti-ligature Grab Bars
Suicide-resistant No space between wall and bar Installed in healthcare and correctional facilities across the USA The only security bar to allow full grip...
-
Whitehall Mfg. WH2142W2 Ligature-Resistant Toilet Wall Supply On-Floor Wall Waste
On-Floor/Wall Waste: Available as Option Wall Supply: Available as Option Ligature Resistant: Yes Appropriate for: Ligature Resistant Waste Location...
