This entrance must be open whenever other public entrances are open....
Search Results "Door Opening Angle"
Filters
Commonly Searched Documents
-
Accessible Entrances
-
Single-User Toilet Rooms: Split Plumbing
Note that lavatories (and other fixtures) cannot overlap door maneuvering clearances, including latch-side clearances....
-
Bobrick TrimLineSeries Recessed Paper Towel Dispenser/Waste Receptacle B-36903
Door has 90° return, conceals flange. Dispenses 300 C-fold or 400 multifold towels. Removable, leak-proof, 1.6‑gal. (6.1-L) waste container....
-
Bobrick ClassicSeries Recessed Paper Towel Dispenser B-359
Door equipped with full-length stainless steel piano-hinge at bottom; swings down for easy filling. Rough Wall Opening: 11 1/4" W, 15 5/8" H, 4" min. depth (285 x 395 x 100mm)....
-
Bobrick ClassicSeries Recessed Sanitary Napkin Disposal and Toilet Tissue Dispenser B-3094
Disposal door is self-closing. Receptacle retained in cabinet by tumbler lock. Capacity: 3⁄4‑gal. (2.8‑L). Holds two rolls up to 5 1/4" (135mm) diameter (1800 sheets)....
-
Bobrick ClassicSeries Recessed Paper Towel Dispenser/Waste Receptacle B-369
Knob-latch retains door. Removable waste container has 2-gal. (7.6-L) capacity. Rough Wall Opening: 12 5/8" W, 26 5/8" H, 4" min. depth (320 x 675 x 100mm)....
-
AJW Architectural Products U6054 Unidoor Folded Towel Dispenser & Waste Receptacle Combination - Recessed
Door: Fabricated of #22 ga stainless steel with a #4 satin finish and full length door stops. Towel Dispenser: Dispensing area has hemmed edges to prevent injury and towel tearing....
-
AJW Architectural Products U6014 Unidoor Folded Towel Dispenser & Waste Receptacle Combination - Recessed
Fabricated of #22 gauge stainless steel with a #4 satin finish Holds 600 c-fold, 800 multifold or 1200 singlefold towels Waste receptacle has a 6 gallon capacity Unit features Uni-door...
-
AJW Architectural Products U2334 Unidoor C-fold/Multifold Towel Dispenser - Recessed
Uni-Door: Fabricated of #18 ga stainless steel with a #4 satin finish with 1/2" returns to wall surface....
-
1013.2 Where required
Guards shall be located along open-sided walking surfaces, including mezzanines, equipment platforms, stairs, ramps and landings that are located more than 30 inches (762 mm) measured vertically...
-
1007.3 Enclosed exit stairways
Exceptions: Open exit stairways as permitted by Section 1019.1 are permitted to be considered part of an accessible means of egress....
-
Trash and Recycling Receptacles [1011.2 and 1011.3]
At trash and recycling containers, a minimum of 36 by 48 inches of clear ground space positioned for a forward approach to the receptacle opening, or a minimum of 30 by 60 inches of...
-
1015.2 Where required
Guards shall be located along open-sided walking surfaces, including mezzanines, equipment platforms, aisles, stairs, ramps and landings that are located more than 30 inches (762 mm) measured...
-
11B-608.2.2 Standard roll-in type shower compartments
roll-in type shower compartments shall be 30 inches (762 mm) wide minimum by 60 inches (1524 mm) deep minimum clear inside dimensions measured at center points of opposing sides with a full opening...
-
4.3.8 Operating forces
For example, many drawers or cabinets require tight pinching to open but adding a more ergonomically designed handle and rollers to the bottom of the drawer allows it to open with ease....
-
1009.4.2 Area of refuge
Exceptions: Areas of refuge are not required at the elevator in open parking garages....
-
1002.4.5 Ride Entry
Openings providing entry to wheelchair spaces on amusement rides shall be 32 inches (815 mm) minimum clear....
-
11B-1002.4.5 Ride entry
Openings providing entry to wheelchair spaces on amusement rides shall be 32 inches (813 mm) minimum clear....
-
1002.4.5 Ride Entry
Openings providing entry to wheelchair spaces on amusement rides shall be 32 inches (815 mm) minimum clear....
-
11B-1002.4.5 Ride entry
Openings providing entry to wheelchair spaces on amusement rides shall be 32 inches (813 mm) minimum clear....
-
11B-1002.4.5 Ride entry
Openings providing entry to wheelchair spaces on amusement rides shall be 32 inches (813 mm) minimum clear....
-
Jacknob Corp. 9099 ADA Latch & Keeper Surface-Mounted Partition Door Hardware
9099 Latch & Keeper-Surface Mounted-ADA (6049-Bob Style) CRSS Satin Stainless Steel
-
Minimum Clear Headroom
The commenters stated that standard doors provide a height range from 75 to 79 inches, and that an 80-inch specification would considerably increase the cost of each door installed....
-
American Safety Tread Co., Inc. Type G500R Stairway Nosing Replacement
Width: 9" Lip: 1-3/8" at 90° angle Thickness: 1/4" Anchor Options: Drilled for screws....
