Such wheelchair spaces shall not reduce the means of egress minimum width or required capacity....
Search Results "Clear Width"
-
1009.6.3 Size
-
11B-405.7.5 Doorways
Doors, when fully open, shall not reduce the required ramp landing width by more than 3 inches (76 mm)....
-
§ 38.23(d)(4) Orientation
wheelchair or mobility aid facing forward, or rearward with a padded barrier, extending from a height of 38 inches from the vehicle floor to a height of 56 inches from the vehicle floor with a width...
-
1009.6.3 Size
Such wheelchair spaces shall not reduce the means of egress minimum width or required capacity....
-
Technical Memorandum TM 2017-25 Door and Gate Surfaces
This smooth surface must extend the full width of the door or gate....
-
Exemptions for Entire Trail or Beach Access Route
for trails when: The combination of running slope and cross slope exceeds 40 percent for over 20 feet; A trail obstacle 30 inches high or more runs across the full tread width...
-
1.1.13 Flatness of ramp running slope
For ramps over 5 ft (1525 mm) in width between handrails measure along an additional line for each additional 36 in. (915 mm) of width or fraction thereof beyond 5 ft (1525 mm)....
- Aqua Creek Scout Excel
- Door Scope® Door Viewer
- Landscape Forms Inc. Palisade Bench Collection
- Mighty 400 Pool & Spa Access Lift
-
Executive summary
The minimum length and width included in the clear floor space requirements located adjacent to the ride seat or transfer device do not accommodate many wheeled mobility device users....
-
T402 Ramps and Bridgeplates
technical requirements for ramps and bridgeplates in the 2016 Non-Rail Vehicle Guidelines include provisions on design load, installation and operation, emergency operation, surfaces, clear...
- Grainger Tough Guy Stainless Steel Sanitary Napkin Receptacle, 11" Height
- Inpro Corporation JointMaster® 300 Series Recessed Mount Floor Expansion Joint Covers
- Sargent 8300 Mortise Lock Exit Device
- Sesame Retractable Stairs with Lift
- Sargent AD8600 & NB-AD8600 Concealed Vertical Rod Exit Device for Aluminum Doors
-
608.2.2 Standard Roll-In Type Shower Compartments
Standard roll-in type shower compartments shall be 30 inches (760 mm) wide minimum by 60 inches (1525 mm) deep minimum clear inside dimensions measured at center points of opposing sides...
-
Basic Features
Careful planning and design will incorporate elements such as a wider entrance door, adequate clear floor space, appropriate placement and models of fixtures and furniture, and grab bars...
-
802.1.4 Approach
Because accessible routes serving wheelchair spaces are not permitted to overlap the clear floor space at wheelchair spaces, access to any wheelchair space cannot be through another wheelchair...
-
7(2)(a)(i)
Doors may swing into the clear floor space provided at any fixture if the maneuvering space is provided....
-
Define "task." (Section-by-Section Analysis)
The Department feels that the common definition of task is sufficiently clear and that it is not necessary to add the term to the definitions section; however, the Department has proposed...
-
H15
Is at least one wide toilet stall provided with an out swinging door, side and rear grab bars, and clear space next to the toilet?...