Section 221.2.3.1 covers scoping requirements in the current ADA Standards for horizontal Dispersion in assembly areas.
Search Results "Segment Length"
Filters
Commonly Searched Documents
-
Horizontal Dispersion: ADA Standard Section 221.2.3.1
-
11B-809.8.3 Door maneuvering clearance.
At the dwelling unit side of the primary entry doors, secondary exterior doors, and required exit doors maneuvering clearances shall be 44 inches (1118 mm) minimum in length measured...
-
11B-502.6.4.1
The centerline of the International Symbol of Accessibility shall be a maximum of 6 inches (152 mm) from the centerline of the parking space, its sides parallel to the length of the parking...
-
Resting Intervals [1018.8]
Resting intervals are level areas that provide an opportunity for people to stop after a steep segment and recover before continuing on....
-
Single-User Toilet Rooms: Split Plumbing
., one of the segments aligned with the route into the room)....
-
Klingstone 400
Klingstone 400 The trail segment is composed of the stabilizer, Klingstone 400 and is 5 feet wide by 104 feet long. The segment contains timber edging....
-
11B-406.3.1 Slope
The running slope of the curb ramp segments shall be in-line with the direction of sidewalk travel. Ramp runs shall have a running slope not steeper than 1:12....
-
§100.143(d)(4)
(4) Developing outreach programs, marketing strategies, or loan products to serve more effectively the segments of the lender's market that may have been affected by the likely violation...
-
11B-406.3.1 Slope
The running slope of the curb ramp segments shall be in-line with the direction of sidewalk travel. Ramp runs shall have a running slope not steeper than 1:12....
-
11B-406.3.1 Slope
The running slope of the curb ramp segments shall be in-line with the direction of sidewalk travel. Ramp runs shall have a running slope not steeper than 1:12....
-
Resting Intervals [1017.8]
Resting intervals are level areas that provide an opportunity for people to stop after a steep segment and recover before continuing on....
-
Maintenance
Routine or periodic repair of trails or trail segments to restore them to the standards to which they were originally designed and built. ...
-
4.8.5(2)
(2) If handrails are not continuous, they shall extend at least 12 in (305 mm) beyond the top and bottom of the ramp segment and shall be parallel with the floor or ground surface (see Fig...
-
11B-813.2.1.2 Clearance
A 36 inches minimum (914 mm) width side clearance shall be provided along the entire length of one side of adult changing tables....
-
4. Assess During the Planning, Installation and Maintenance Phases
The segments from the entry and composite structure to the swings, including the clear ground space at a swing. Segments to each accessible ground level play component....
-
Diagonal Curb Ramps [§406.6]
A segment of curb at least 24” long beyond flares must be provided on both sides of curb ramps with side flares within marked crossings....
-
Gripping Surface: ADA Standard Section 505.6
Section 505.6 covers the current ADA Standards for the handrail gripping surface.
-
11B-505.6 Gripping surface
Handrail gripping surfaces shall be continuous along their length and shall not be obstructed along their tops or sides....
-
The FSTAG Implementation Process Flowchart
Identify and verify the desired Trail Class for the trail or trail segment. Identify and verify the "Designed Use" of the trail or trail segment....
-
Summary of Results
Summary of Results The qualitative and quantitative data show that the trail segments constructed of ¾ inch minus limestone aggregate, Klingstone 400 soil stabilizer, and StaLok stabilizer...
-
§100.75(c)(3)
(3) Selecting media or locations for advertising the sale or rental of dwellings which deny particular segments of the housing market information about housing opportunities because of race...
-
1017.8.2 Width
This section requires resting intervals that are provided within the trail tread to be at least as wide as the widest segment of the trail tread leading to the resting interval....
-
11B-705.1.2.2.2.1 One entrance/exit point
Where the turning space has one entrance/exit point other than the sloped ramp segments, detectable warnings shall be 36 inches (914 mm) deep, as measured perpendicular to the curb, and...
-
11B-221.2.3.1 Horizontal dispersion
required in assembly areas with 300 or fewer seats if the companion seats required by Section 11B-221.3 and wheelchair spaces are located within the 2nd or 3rd quartile of the total row length...