Support rails shall be smooth and any surface adjacent to them shall be free of sharp or abrasive elements....
Search Results "Intercity Rail Passenger Car"
Filters
Commonly Searched Documents
-
11B-407.4.10.2 Surfaces
-
11B-209 Passenger drop-off and loading zones and bus stops
209 Passenger Loading Zones and Bus Stops ETA Editor’s Note The CBC includes passenger drop-off. Therefore, the CBC is more inclusive....
-
10.3.1(9)
the vehicle is at rest, is within plus or minus 5/8 inch under normal passenger load conditions....
-
§ 38.95(c)(6)(i) Requirement
(i) Requirement. When in use for boarding or alighting, the ramp or bridge plate shall be attached to the vehicle, or otherwise prevented from moving such that it is not subject to...
-
§ 38.93(b) Passageways
In cars where such doorways require passage through a vestibule, such vestibule shall have a minimum width of 42 inches. (See Fig. 3.)...
-
11B-407.4.10.3 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the support rail, fastener, mounting device...
-
T209 Fare Collection Devices
[See subsections ...]
-
11B-810.5 Rail Platforms
Rail platforms shall comply with Section 11B-810.5....
-
11B-810.5 Rail Platforms
Rail platforms shall comply with Section 11B-810.5....
-
11B-810.5 Rail Platforms
Rail platforms shall comply with Section 11B-810.5....
-
11B-206.4.4.1 Location
Exception: Entrances to key stations and existing intercity rail stations retrofitted in accordance with 49 CFR 37.49 or 49 CFR 37.51 shall not be required to comply with Section 11B-206.4.4.1...
-
11B-206.4.4.1 Location
Exception: Entrances to key stations and existing intercity rail stations retrofitted in accordance with 49 CFR 37.49 or 49 CFR 37.51 shall not be required to comply with Section 11B-206.4.4.1...
-
Transit Facilities: Rail Stations
Transit Facilities: Rail Stations Much of the early research on detectable warnings was conducted at rapid rail stations and the requirement to provide a detectable warning remains in...
-
4. Passenger Vessels
In June of 2013 the Board released for public comment proposed guidelines for access to ferries, cruise ships, excursion boats, and other passenger vessels under the ADA....
-
4. Passenger Vessels
In June of 2013, the Board released for public comment guidelines for access to ferries, cruise ships, excursion boats, and other passenger vessels under the ADA....
-
4. Passenger Vessels
In June of 2013, the Board released for public comment guidelines for access to ferries, cruise ships, excursion boats, and other passenger vessels under the ADA....
-
§ 37.3 Commuter rail transportation
Commuter rail transportation means short-haul rail passenger service operating in metropolitan and suburban areas, whether within or across the geographical boundaries of a state, usually...
-
§ 38.99 Floors, steps and thresholds
[See subsections ...]
-
§ 38.99(a)
(a) Floor surfaces on aisles, step treads, places for standees, and areas where wheelchair and mobility aid users are to be accommodated shall be slip-resistant
-
12161(2) Commuter rail transportation
(2) Commuter rail transportation The term "commuter rail transportation" has the meaning given the term "commuter rail passenger transportation" in section 24102(5) of title 49....
-
§ 37.3 Rapid rail
Rapid rail means a subway-type transit vehicle railway operated on exclusive private rights of way with high level platform stations....
-
11B-409.4.6 Car controls
Elevator car control buttons shall comply with Sections 11B-409.4.6, 11B-309.3, 11B-309.4, and shall be raised or flush....
-
Vehicle Pull-Up Space: ADA Standard Section 503.2
Section 503.2 covers the current ADA Standards for vehicle pull-up space at passenger loading zones.
-
§ 38.95(c)(2) Ramp surface
(2) Ramp surface. The ramp or bridge plate surface shall be continuous and slip resistant, shall not have protrusions from the surface greater than 1/4 inch high, shall have a clear...