Section 38.23(d) of the DOT ADA regulations requires all ADA-compliant buses and vans to have a two-part securement system, one to secure the wheelchair, and a seat belt and shoulder...
Search Results "Intercity Rail Passenger Car"
-
What kinds of securement equipment must be provided in buses and vans?
-
§ 38.95(b)(7) Platform gaps
When the lift is at car floor height with the inner barrier down (if applicable) or retracted, gaps between the forward lift platform edge and car floor shall not exceed 1/2 inch horizontally...
-
Atlantis Railing
Our ADA accessibility railings can be customized to incorporate any of our other railing infill options and they are available in highly polished or brushed finish stainless steel rails....
-
§ 38.93 Doorways
[56 FR 45756, Sept. 6, 1991, as amended at 76 FR 57939, Sept. 19, 2011]
-
General: ADA Standard Section 503.1
Section 503.1 of the ADA Standards covers information in the current ADA Standards for passenger loading zones.
-
What is the Minimum Width for Non-Level Boarding?
[49 CFR §§ 37.9, 37.41-37.43, 38.125] June 16, 2015
-
Type: ADA Standard Section 209.2
Section 209.2 covers scoping requirements in the most current ADA Standards for the different types of passenger loading zones.
-
11B-209.2.1 Passenger drop-off and loading zones
Passenger drop-off and loading zones, except those required to comply with Sections 11B-209.2.2 and 11B-209.2.3, shall provide at least one passenger drop-off and loading zone complying...
-
11B-209.2.1 Passenger drop-off and loading zones
Passenger drop-off and loading zones, except those required to comply with Sections 11B-209.2.2 and 11B-209.2.3, shall provide at least one passenger drop-off and loading zone complying...
-
Railings: ADA Standard Section 1005.2
Where provided, railings, guards, or handrails shall comply with 1005.2....
-
Atlantis Rail Systems Cable Railing How To Instructional Video
Requires the Registered User plan or above. Login! -
11B-407.4.10.1 Location
Clearance between support rails and adjacent surfaces shall be 1½ inches (38 mm) minimum....
-
11B-407.4.10.1 Location
Clearance between support rails and adjacent surfaces shall be 1½ inches (38 mm) minimum....
-
§ 38.95(c)(6) Attachment
(6) Attachment—.
-
§ 38.95(b)(12) Use by standees
(12) Use by standees. Lifts shall accommodate persons using walkers, crutches, canes or braces or who otherwise have difficulty using steps. The lift may be marked to indicate a...
-
§ 38.95(c)(1) Design load
(1) Design load. Ramps or bridge plates 30 inches or longer shall support a load of 600 pounds, placed at the centroid of the ramp or bridge plate distributed over an area of 26...
-
§ 38.95(b)(3) Emergency operation
(3) Emergency operation. The lift shall incorporate an emergency method of deploying, lowering to ground or platform level with a lift occupant, and raising and stowing the empty...
-
§ 38.95(b)(1) Design load
(1) Design load. The design load of the lift shall be at least 600 pounds. Working parts, such as cables, pulleys, and shafts, which can be expected to wear, and upon which the lift...
-
§ 38.95(b)(2) Controls
(2) Controls—
-
§ 38.95(b)(11) Boarding direction
(11) Boarding direction. The lift shall permit both inboard and outboard facing of wheelchairs and mobility aids.
-
General: ADA Standard Section 209.1
Section 209.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for passenger loading zones and bus stops.
-
11B-810.5.3 Platform and vehicle floor coordination
, commuter rail, or intercity rail systems: [ADA Title II - Public Transportation] 810.5.3 Platform and Vehicle Floor Coordination....
-
11B-810.5.3 Platform and vehicle floor coordination
, commuter rail, or intercity rail systems: [ADA Title II - Public Transportation] 810.5.3 Platform and Vehicle Floor Coordination....
-
Sunrail AccessEasy - ADA Accessibility Railings: Cable Railing Instructional Video
Requires the Registered User plan or above. Login!
