Where solid partitions or security glazing separate visitors from detainees at least one of each type of cubicle or counter partition shall comply with Section 11B-904.6....
Search Results "Drop-Off Counter"
Filters
Commonly Searched Documents
-
11B-231.4.2 Partitions
-
11B-231.4.2 Partitions
Where solid partitions or security glazing separate visitors from detainees at least one of each type of cubicle or counter partition shall comply with Section 11B-904.6....
-
11B-231.4.2 Partitions
Where solid partitions or security glazing separate visitors from detainees at least one of each type of cubicle or counter partition shall comply with Section 11B-904.6....
-
Accessible Route Into and Through the Business
If construction or repair requires customers to detour around taped-off areas or to step up on plywood walkways, ensure that the temporary route is accessible or that there is an alternate...
-
608.6 Shower Spray Unit and Water
The shower spray unit shall have an on/off control with a non-positive shut-off....
-
608.6 Shower Spray Unit and Water
The shower spray unit shall have an on/off control with a non-positive shut-off....
-
608.6 Shower Spray Unit and Water
The shower spray unit shall have an on/off control with a non-positive shut-off....
-
608.6 Shower Spray Unit and Water
The shower spray unit shall have an on/off control with a non-positive shut-off....
-
11B-206.2.15 Golf facilities
In addition, accessible routes serving golf car rental areas; bag drop areas; course weather shelters complying with Section 11B-238.2.3; course toilet rooms; and practice putting greens...
-
Height: ADA Standard Section 902.3
The tops of dining surfaces and work surfaces shall be 28 inches (710 mm) minimum and 34 inches (865 mm) maximum above the finish floor or ground.
-
11B-902.3 Height
The tops of dining surfaces and work surfaces shall be 28 inches (711 mm) minimum and 34 inches (864 mm) maximum above the finish floor or ground.
-
231.4 Visiting Areas
231.4 Visiting Areas. Visiting areas shall comply with 231.4.
-
F231.4 Visiting Areas
Visiting areas shall comply with F231.4.
-
11B-231.4 Visiting areas
Visiting areas shall comply with 11B-231.4.
-
231.4 Visiting Areas
Visiting areas shall comply with 231.4.
-
1133A.4.1 Exceptions
Exceptions: Stone, cultured stone and tiled countertops may be used without meeting the repositioning requirements. Two 15-inch (381 mm) wide minimum breadboards may...
-
1133A.4, Item 1
1. A minimum linear length of 30 inches (762 mm) of countertop shall be provided for the kitchen sink installation.
-
7.3(3)
(3) Signage identifying accessible check-out aisles shall comply with 4.30.7 and shall be mounted above the check-out aisle in the same location where the check-out number or type of...
-
4.7.2 Slope
Slopes of curb ramps shall comply with 4.8.2. The slope shall be measured as shown in Fig. 11. Transitions from ramps to walks, gutters, or streets shall be flush and free of abrupt...
-
4.7.2 SLOPE
Slopes of curb ramps shall comply with 4.8.2. The slope shall be measured as shown in Fig. 11. Transitions from ramps to walks, gutters, or streets shall be flush and free of abrupt...
-
11B-231.4 Visiting areas
Visiting areas shall comply with 11B-231.4.
-
1133A.4, Item 1
1. A minimum linear length of 30 inches (762 mm) of countertop shall be provided for the kitchen sink installation.
-
11B-231.4 Visiting areas
Visiting areas shall comply with Section 11B-231.4.
-
Accessible Routes: ADA Standard Section 1006.2
routes serving teeing grounds, practice teeing grounds, putting greens, practice putting greens, teeing stations at driving ranges, course weather shelters, golf car rental areas, bag drop...