Common Requirements (R304.5)Â (Section-by-Section Analysis) The clear width of curb ramp runs (excluding flared sides), blended transitions, and turning spaces must be 1.2 meters (4 feet...
Search Results "Bus Rapid Transit"
-
Common Requirements (R304.5) (Section-by-Section Analysis)
-
10.1 General
Every station, bus stop, bus stop pad, terminal, building or other transportation facility, shall comply with the applicable provisions of 4.1 through 4.35, sections 5 through 9, and the...
-
U.S. Department of Transportation, Federal Transit Administration, Office of Civil Rights
The Federal Transit Administration (FTA) is an agency within the United States Department of Transportation (DOT) that provides financial and technical assistance to local public transit...
-
§ 35.150(d) Transition plan
(d) Transition plan....
-
General (R304.1) (Section-by-Section Analysis)
Blended transitions are raised pedestrian street crossings, depressed corners, or similar connections between the pedestrian access route at the level of the sidewalk and the level of the...
-
11B-810.2.1 Surface
Bus stop boarding and alighting areas shall have a firm, stable surface....
-
810.2.1 Surface
Bus stop boarding and alighting areas shall have a firm, stable surface....
-
11B-810.2.1 Surface
Bus stop boarding and alighting areas shall have a firm, stable surface....
-
11B-810.2.1 Surface
Bus stop boarding and alighting areas shall have a firm, stable surface....
-
810.2.1 Surface
Bus stop boarding and alighting areas shall have a firm, stable surface....
-
406.2 Counter Slope
The adjacent surfaces at transitions at curb ramps to walks, gutters, and streets shall be at the same level....
-
810.2.1 Surface
Bus stop boarding and alighting areas shall have a firm, stable surface....
-
11B-406.5.8 Counter slope
The adjacent surfaces at transitions at curb ramps to walks, gutters, and streets shall be at the same level....
-
406.2 Counter Slope
The adjacent surfaces at transitions at curb ramps to walks, gutters, and streets shall be at the same level. Figure 406.2 Counter Slope of Surfaces Adjacent to Curb Ramps...
-
F209 Passenger Loading Zones and Bus Stops
[See subsections ...]
-
209 Passenger Loading Zones and Bus Stops
[See subsections ...]
-
406.2 Counter Slope
The adjacent surfaces at transitions at curb ramps to walks, gutters, and streets shall be at the same level. Figure 406.2 Counter Slope of Surfaces Adjacent to Curb Ramps...
-
CHAPTER 4: BOARDING AND ALIGHTING
[See subsections ...]
-
Which transition type do users with disabilities prefer?
When a sidewalk slopes more than 2% in the direction of travel and a walk with a maximum 2% cross slope intersects it, which transition segment type provides the safest usability for the...
-
11B-406.5.8 Counter slope
The adjacent surfaces at transitions at curb ramps to walks, gutters, and streets shall be at the same level....
-
12147(b) Special rule for stations
(b) Special rule for stations
-
SafePath VulcanLanding™ Rubber Transition Ramp
Modifying vertical rises at door thresholds often requires more than just a ramp, it requires a level-landing, otherwise known as maneuverable clearance area, a firm and stable level...
-
T502.2.1 Over-the-Road Buses
For over-the-road buses, the vertical clearance at doorways shall be 65 inches (1650 mm) minimum.
-
T503.1 General
Illumination shall be provided at ramps, bridgeplates, doorways, and boarding and alighting areas in accordance with T503. Lights shall be shielded so as not to project directly into...
