Commenters noted that on some of the Department’s plans where a vanity is located adjacent to a bathtub, the vanity may require more maintenance due to exposure to water....
Search Results "Bathtub Clearance"
-
806 Transient Lodging Guest Rooms
-
4.17.4 Toe Clearances
In standard stalls, the front partition and at least one side partition shall provide a toe clearance of at least 9 in (230 mm) above the floor....
-
4.17.4 TOE CLEARANCES
In standard stalls, the front partition and at least one side partition shall provide a toe clearance of at least 9 in (230 mm) above the floor....
-
Maximum Depth: ADA Standard Section 306.3.2
Section 306.3.2 covers the current ADA Standards for the maximum depth for knee clearance.
-
305.4 Knee and Toe Clearance
305.4 Knee and Toe Clearance. Unless otherwise specified, clear floor or ground space shall be permitted to include knee and toe clearance complying with 306....
-
Back Wall: ADA Standard Section 607.4.1.1
Section 607.4.1.1 covers the current ADA Standards for back wall grab bars in bathtubs with permanent seats.
-
American Standard Colony Soft Deck-Mount Tub Filler
When matched with an R800 valve body, sold separately, it fills a bathtub or whirlpool quicker than a regular faucet so you can relax faster....
-
11B-404.3.2 Maneuvering clearance
Clearances at power-assisted doors and gates shall comply with Section 11B-404.2.4....
-
11B-404.3.2 Maneuvering clearance
Clearances at power-assisted doors and gates shall comply with Section 11B-404.2.4....
-
Kohler Dynametric® 60" x 32" alcove bath with left-hand drain
See how durable KOHLER® Enameled Cast Iron has been crafted for over 100 years, built to last for generations.
-
Ella Wheelchair Transfer Tub Video
Video demonstrating the use and function of the Ella Wheelchair Transfer Tub.
-
11B-607.4.1.1 Back wall
shall be installed on the back wall, one located in accordance with Section 11B-609.4 and the other located 8 inches (203 mm) minimum and 10 inches (254 mm) maximum above the rim of the bathtub...
-
11B-607.4.1.1 Back wall
shall be installed on the back wall, one located in accordance with Section 11B-609.4 and the other located 8 inches (203 mm) minimum and 10 inches (254 mm) maximum above the rim of the bathtub...
-
27.1 Q. Do the Guidelines set any requirements for the type or location of bathtub controls?
A. No, except where the specifications in Requirement 7(2)(b) are used. In that case, while the type of control is not specified, the control must be located as shown in Figure 8 of...
-
11B-607.4.2.1 Back wall
shall be installed on the back wall, one located in accordance with Section 11B-609.4 and the other located 8 inches (203 mm) minimum and 10 inches (254 mm) maximum above the rim of the bathtub...
-
Back Wall: ADA Standard Section 607.4.2.1
Section 607.4.2.1 covers the current ADA Standards for back wall grab bars in bathtubs without permanent seats.
-
11B-607.4.2.1 Back wall
shall be installed on the back wall, one located in accordance with Section 11B-609.4 and the other located 8 inches (203 mm) minimum and 10 inches (254 mm) maximum above the rim of the bathtub...
-
11B-813.2.1.2 Clearance
A 36 inches minimum (914 mm) width side clearance shall be provided along the entire length of one side of adult changing tables....
-
11B-813.2.1.2 Clearance
A 36 inches minimum (914 mm) width side clearance shall be provided along the entire length of one side of adult changing tables....
-
Figure 404.2.4.1(k) Maneuvering Clearances at Manual Swinging Doors and Gates: Latch Approach, Push Side with Closer – Drawing from the U.S. Access Board
-
Figure 404.2.4.3(a) Maneuvering Clearance at Recessed Doors and Gates – Drawing from the U.S. Access Board
-
306.2 Toe Clearance
[See subsections ...]
-
306.3 Knee Clearance
[See subsections ...]
