Cover: Fabricated of #22 ga stainless steel #4 satin finish with embossed handles on each side and sloped top. Hinge: Heavy duty, full length, stainless steel piano type hinge....
Search Results "Side Transfer Surface"
Commonly Searched Documents
- AJW Architectural Products U591 1.6 Gallon Sanitary Napkin Disposal - Surface Mounted
-
FEATURES
The corner radii allow for closer wheelchair positioning to facilitate independent transfer by minimizing gaps....
- Garaventa Evacu-Trac's Brake Can Stop it on the Stairway
-
Where must curb ramps be provided?
Curb ramps must be located to ensure a person with a mobility disability can travel from a sidewalk on one side of the street, over or through any curbs or traffic islands, to the sidewalk...
-
[F] WORKSTATION
[DSA-AC] An area defined by equipment and/or work surfaces intended for use by employees only, and generally for one or a small number of employees at a time....
-
[F] WORKSTATION
[DSA-AC] An area defined by equipment and/or work surfaces intended for use by employees only, and generally for one or a small number of employees at a time....
-
[F] WORKSTATION
[DSA-AC] An area defined by equipment and/or work surfaces intended for use by employees only, and generally for one or a small number of employees at a time....
-
Bobrick ClassicSeries LiquidMate® Surface-Mounted Soap Dispenser B-156 Elevations
Requires the Premium User plan or above. (Login or upgrade your account!)
-
Housekeeping
This will help prevent wheelchairs from sliding during transfers and provides greater stability for standing guests....
-
R305.1.4 Size
Detectable warning surfaces shall extend 610 mm (2.0 ft) minimum in the direction of pedestrian travel....
- Willoughby Industries WAF-440 AquaFount® Four Station Solid Surface Washfountain
-
Tent Pads and Tent Platforms
Provide a minimum 48-inch (1,220-millimeter) clear floor or ground space on all sides of tents on tent pads and platforms that are required to be accessible....
-
1011.2.1 Size and Location
Outdoor constructed features can be confined on all or part of three sides by surfaces that are not firm and stable or that have changes in level....
-
11B-604.5.2 Rear wall
The rear wall grab bar shall be 36 inches (914 mm) long minimum and extend from the centerline of the water closet 12 inches (305 mm) minimum on one side and 24 inches (610 mm) minimum on...
- Whitehall Manufacturing Surface Mounted Ligature Resistant Auto-Release Toilet Paper Holder
-
A MINIMUM HIGHEST POINT STANDARD OF 19 INCHES IS CONSISTENT WITH EXISTING ACCESSIBILITY STANDARDS
A MINIMUM HIGHEST POINT STANDARD OF 19 INCHES IS CONSISTENT WITH EXISTING ACCESSIBILITY STANDARDS Current accessibility standards and regulations generally consider a transfer surface...
- American Specialties Dual Roll Surface Mounted Toilet Paper Holder 7305-2
-
4.2 Stretchers
They are best known as transport devices for patients in supine, prone, or side-lying positions....
-
M303.2.6 Edge Protection
Where wheelchair spaces are provided on a platform raised more than 1 ½ inches (38 mm) in height, edge protection 2 inches (51 mm) high minimum measured from the surface of the platform...
-
11B-704.4.1 Height
When in use, the touch surface of TTY keypads shall be 34 inches (864 mm) minimum above the finish floor....
-
BENEFITS AND COSTS: OVERVIEW
BENEFITS AND COSTS: OVERVIEW Based on our analysis, we determined that transfer surface height requirements lower than 19 inches would increase the cost of designing and manufacturing...
-
Openings, Width and Length of Wheelchair Space
Wheelchair spaces must have a clear width of 30 inches minimum and a clear length of 48 inches minimum, measured to at least 9 inches above the floor surface....
-
R208.2 Where Not Required
Detectable warning surfaces are not required at cut-through pedestrian refuge islands that are less than 1.8 meters (6.0 ft) in length because detectable warning surfaces must extend 610...
- Willoughby Industries WAW-2333 AquaWave® Three Station Solid Surface Lavatory System