Is the curb ramp surface at least 36 inches wide, excluding flared sides? [ADA Standards § 4.7.3] Yes No...
Search Results "Side Transfer Surface"
Filters
Commonly Searched Documents
-
e-i
-
35. Please indicate any unusual events that occurred during the last quarter that affected the surface of the trail
Please indicate any unusual events that occurred during the last quarter that affected the surface of the trail (e.g., inclement weather conditions, major program use, special events, etc...
-
AJW Architectural Products U704 Series 16"W x 30"H Fixed Tilt Angle Frame Mirror - Plate Glass Surface
Product Features Fabricated of #18 gauge stainless steel with #4 satin finish Frame extends 4" at the top and tapers to 1" at bottom Multiple reflective surfaces available Mirror...
-
Court Sports
Accessible routes must comply with all ADAAG requirements, such as width and changes in level or surface, and must directly connect both sides of the court....
-
MEASUREMENT TECHNIQUE
MEASUREMENT TECHNIQUE The depth and width are measured along the centerlines of the seat, and the height from the floor to the highest point of the transfer surface: The depth...
-
1013.2 Clear Ground Space
The usable sides of tent pads and tent platforms are the sides that can be used when setting up and taking down a tent....
-
Hager Companies Five Knuckle - Full Surface Swing Clear Hinge BB1266
Five Knuckle - Full Surface Swing Clear Hinge BB1266 - Ball Bearing - Heavy Weight Description: - ANSI A8321 - Beveled surface leaves - Non-rising removable pin with...
-
Hager Companies Five Knuckle - Half Surface Swing Clear Hinge BB1270
Five Knuckle - Half Surface Swing Clear Hinge BB1270 - Ball Bearing - Heavy Weight Description: - ANSI A8421 - Beveled surface leaf - Non-rising removable pin with button...
-
Hager Companies Three Knuckle - Full Surface Swing Clear Hinge AB7523
Three Knuckle - Full Surface Swing Clear Hinge AB7523 - Concealed Anti-Friction Bearing - Heavy Weight Description: - ANSI A8321 - Beveled surface leaves - Non-rising...
-
Hager Companies Three Knuckle - Half Surface Swing Clear Hinge AB7534
Three Knuckle - Half Surface Swing Clear Hinge AB7534 - Concealed Anti-Friction Bearing - Heavy Weight Description: - ANSI A8421 - Beveled surface leaves - Non-rising removable...
-
B6. Curb Ramp Slope
If a curb ramp is provided, is the slope of the ramp surface (not counting the side flares) no more than 1:12? [ADA Stds 4.7.2] Yes _____ No _____...
-
Parking and Passenger Loading Zones [4.6]
Accessible parking and passenger loading zones require aisles alongside parking and pull-up spaces so that persons using mobility aids can transfer and maneuver to and from vehicles....
-
§ 38.111(a)(4)
(4) Bi-level lounge cars shall have doors on the lower level, on each side of the car from which passengers board, complying with §38.113, a restroom complying with §38.123, and at least...
-
904.3.2 Counter
The counter surface height shall be 38 inches (965 mm) maximum above the finish floor or ground....
-
Intensive Care Transfer with GH3 Ceiling Lift
Read more about Guldmann ceiling lifts at http://www.guldmann.net/ceiling-lifts Watch more videos on http://www.youtube.com/vguldmann
-
Islands: ADA Standard Section 406.7
Section 406.7 covers the current ADA Standards for islands.
-
18. If a soil stabilizer was not used, please indicate the application method and material(s) used to achieve the natural surface
If a soil stabilizer was not used, please indicate the application method and material(s) used to achieve the natural surface....
-
1132A.4 Level floor or landing
The floor or landing on each side of a door shall be level....
-
11B-904.3.2 Counter
The counter surface height shall be 38 inches (965 mm) maximum above the finish floor or ground....
-
Subjects
There are two columns; the left side lists the disability and the right side gives the number of subjects who reported having that disability. ...
-
Water Play Components: ADA Standard Section 1008.2.3
Where the surface of the accessible route, clear floor or ground spaces, or turning spaces serving water play components is submerged, compliance with 302, 403.3, 405.2, 405.3, and 1008.2.6...
-
904.3.2 Counter
The counter surface height shall be 38 inches (965 mm) maximum above the finish floor or ground....
-
M305.3 Standing Supports (Section-by-Section Analysis)
and whether standing supports can provide a 1½ inch minimum clearance around the gripping surface....
-
A6
If a curb ramp is provided, is the running slope of the ramp surface (not counting the side flares) no more than 1:12 or 8.33% [ADA Standards § 4.7.2] Yes No...
