., the actual work or task performed by the service animal). Another critical factor rests on the severity of the individual's impairment. ...
Search Results "Work Surface"
Filters
Commonly Searched Documents
-
Comfort animals. (Section-by-Section Analysis)
-
Comfort animals. (Section-by-Section Analysis)
., the actual work or task performed by the service animal. Another critical factor rests on the severity of the individual's impairment. ...
-
E. ADA Coordination and Training:
Olympia shall train all present and future staff who work at Joe Louis Arena on any ADA issues relevant to their position at Joe Louis Arena, including but not limited to: (1) location...
-
§ 1194.31(b)
(b) At least one mode of operation and information retrieval that does not require visual acuity greater than 20/70 shall be provided in audio and enlarged print output working together...
-
Maintenance
Maintenance By far, the most frequent complaint about assistive listening systems is that they do not work properly and that no one at a facility knows how to operate or fix them....
-
FULL AND FAIR CASH VALUE
Full and fair cash value is calculated for the estimated date on which work will commence on a project and means: (1) The assessed valuation of a building or facility as recorded in the...
-
ACTIONS TO BE TAKEN BY THE STATE DEPARTMENT OF AGING
SDA has actively worked with the Department to begin addressing accessibility concerns set out in this Agreement....
-
R306.3.1 Separation
Detectable warning surfaces shall not be used for edge treatment....
-
11B-221.4 Designated aisle seats
The aisle seats chosen to meet Section 11B-802.4 must be those at the top and bottom of Aisle A, working toward the middle....
-
Energy Consumption During Ambulation
Subjects walked on each surface at their preferred pace, until the physiological variables (energy consumption, heart rate, velocity) had stabilized (2‒3 minutes) and the data collection...
-
11B-801.1 Scope
For example, 806 addresses guest rooms in transient lodging facilities while 902 contains the technical specifications for dining surfaces....
-
703.4.1 Height above Finish Floor or Ground
Tactile characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest tactile character and 60 inches...
-
M302.4.2 Clearance Around Base
the diagnostic equipment shall provide a clearance 6 inches (150 mm) high minimum measured from the floor and 36 inches (915 mm) deep minimum measured from the edge of the examination surface...
-
M301.4.2 Clearance Around Base
base of diagnostic equipment shall provide a clearance 6 inches (150 mm) high minimum measured from the floor and 36 inches (915 mm) deep minimum measured from the edge of the examination surface...
-
1002.4.4.3 Permitted Protrusions in Wheelchair Spaces
protrude a distance of 6 inches (150 mm) maximum along the front of the wheelchair space, where located 9 inches (230 mm) minimum and 27 inches (685 mm) maximum above the floor or ground surface...
-
MEASUREMENT TECHNIQUE
MEASUREMENT TECHNIQUE The depth and width are measured along the centerlines of the seat, and the height from the floor to the highest point of the transfer surface: The depth...
-
14.2 Q. If both open and covered parking spaces are provided, how many of each type must be accessible?
., surface parking or garage, that are provided for other residents of the project....
-
801.1 Scope
For example, 806 addresses guest rooms in transient lodging facilities while 902 contains the technical specifications for dining surfaces....
-
4.8.1 General
One fixed showerhead shall be 48 inches (1220 mm) above the floor or ground surface, and one fixed shower head shall be 72 inches (1830 mm) minimum above the floor or ground surface....
-
68.30(3) Van Accessible Parking at Garages Constructed Prior to April 1994
If additional surface parking is provided, the required van accessible parking spaces shall be located on a surface lot in closest proximity to the accessible public entrance serving the...
-
11B-1002.4.4.3 Permitted protrusions in wheelchair spaces
protrude a distance of 6 inches (152 mm) maximum along the front of the wheelchair space, where located 9 inches (229 mm) minimum and 27 inches (686 mm) maximum above the floor or ground surface...
-
11B-801.1 Scope
For example, 806 addresses guest rooms in transient lodging facilities while 902 contains the technical specifications for dining surfaces....
-
11B-1002.4.4.3 Permitted protrusions in wheelchair spaces
protrude a distance of 6 inches (152 mm) maximum along the front of the wheelchair space, where located 9 inches (229 mm) minimum and 27 inches (686 mm) maximum above the floor or ground surface...
-
Pricilla Rogers, Ph.D. Making the “Invisible” World “Visible”
And I know you’re talking about how you do your follow-up studies and all that afterwards to find out how the building actually works....