The finished floor shall extend to the wall under the lavatory....
Search Results "Floor Designation"
-
11B-809.10.8.3 Cabinets
-
11B-708.4 Residential dwelling unit communication systems
Communications systems between a residential dwelling unit and a site, building, or floor entrance shall comply with Section 11B-708.4....
-
TOTO® CT705ELN Commercial Flushometer High Efficiency Toilet
This model is designed to work with the TOTO High-Efficiency EcoPower Flush Valves, which feature low water consumption and siphon jet action....
-
Before January 26, 1992
are referred to as “pre-ADA” facilities.25 If there is an architectural barrier to accessibility in a pre-ADA facility, you may remove the barrier using the ADA Standards for Accessible Design...
-
11B-809.8 Doors
The floor or landing at primary entry doors, required exit doors, and secondary exit doors where a change in elevation occurs between the interior and the exterior surface of the floor or...
-
4.4.1 Overview of Mammography Accessibility Considerations
Ordinarily, the accessibility dimensions are static and are measured from a static element, such as the floor....
-
11B-104.1 Dimensions
Dimensions stated as a "maximum" or "minimum" provide a dimensional range for design purposes....
-
11B-104.1 Dimensions
Dimensions stated as a "maximum" or "minimum" provide a dimensional range for design purposes....
-
Requirement 6. Reinforced walls for grab bars.
Section 100.205(c)(3)(iii) requires that covered multifamily dwellings with a building entrance on an accessible route shall be designed and constructed in such a manner that all premises...
-
II-5.5000 Historic preservation programs
An historic property is a property that is listed or eligible for listing in the National Register of Historic Places or a property designated as historic under State or local law....
-
SHOPPING CENTER (OR SHOPPING MALL)
A shopping center may include a series of buildings on a common site, connected by a common pedestrian access route on, above or below the ground floor, that is either under common ownership...
-
Section 36.404 Alterations: Elevator Exemption (Section-By-Section Analysis and Response to Comments)
As is the case with new construction, the term "shopping center or shopping mall'' only includes floor levels housing at least one sales or rental establishment, or any floor level that...
-
Seats: ADA Standard Section 604.4
Section 604.4 covers the current ADA Standards for the water closet seats.
-
Vision Lights: ADA Standard Section 404.2.11
Section 404.2.11 covers the current ADA Standards for vision lights on manual doors and gates.
-
Pressalit Care Adult changing table 3000, electrically height adjustable
Besides an award winning design, the series includes comfortable and durable surfaces, including polyurethane foam and aluminum....
-
Knee and Toe Clearance (M303.2.4)
5 inches deep maximum at 14 inches above the floor Knee Clearance 11 inches deep minimum at 9 inches above the floor, and 8 inches deep minimum at...
-
Substantive changes made to requirements for elevators
the proposed rule) modification of specifications for audible hall signals (407.2.2.3) and audible car position indicators (407.4.8.2) revision of the height of tactile floor...
-
Error/Omission: The shape of the door hardware requires tight grasping, pinching, and twisting of the wrist to use.
Lever-operated mechanisms, push-type mechanisms, and U-shaped handles are acceptable designs....
-
General [4.5.1]
Design guidelines cannot encompass all criteria contributing to the safety of a walking surface....
-
11B-604.8.1.1 Size
shall be 60 inches (1524 mm) wide minimum measured perpendicular to the side wall, and 56 inches (1422 mm) deep minimum for wall hung water closets and 59 inches (1499 mm) deep minimum for floor...
-
11B-407.4.7.1.2 Location
Raised characters or symbols and Braille designations shall be placed immediately to the left of the control button to which the designations apply. Exception: Reserved....
-
11B-407.4.7.1.2 Location
Raised characters or symbols and Braille designations shall be placed immediately to the left of the control button to which the designations apply. Exception: Reserved....
-
11B-902.4.2 Height
The tops of tables and counters shall be 26 inches (660 mm) minimum and 30 inches (762 mm) maximum above the finish floor or ground....
-
11B-707.7.1 Visibility
The display screen shall be visible from a point located 40 inches (1016 mm) above the center of the clear floor space in front of the machine....
