The bottom can be left intact and mounted at existing height, or can be cut off and slid inside the top portion for height adjustment....
Search Results "Signage Height"
Commonly Searched Documents
- Behavioral Safety Products #FV600 Ligature Resistant Flush Valve Cover
- GameTime Sky Run Zip Track - Zero G Seat
- Hill-Rom Sabina® II Mobile Lift
-
11B-226.1 General
Consider work surfaces that are flexible and permit installation at variable heights and clearances....
-
Dune Crossings [1018.10]
The handrails must be continuous at a height of 34 to 38 inches above the walking surface along both sides of the dune crossing (figure 32)....
-
Utility Sinks
Ensure that the height of the counter or rim surrounding the utility sink is not more than 34 inches (865 millimeters) above the ground or floor space and that the bottom of the bowl is...
-
11B-226.1 General
Consider work surfaces that are flexible and permit installation at variable heights and clearances....
-
11B-226.1 General
Consider work surfaces that are flexible and permit installation at variable heights and clearances. ◼...
-
11B-302.2 Carpet
Pile height shall be ½ inch (12.7 mm) maximum. Exposed edges of carpet shall be fastened to floor surfaces and shall have trim on the entire length of the exposed edge....
- BTX Intelligent Fashion Motorized Drapery Systems
- Big John Commode Chair BJBC
- Wikk Industries Ingress'r Automatic Door Control
-
Mobile or Portable Amusement Rides
The commenter noted that the concept is apparent in the signage and load/unload area provisions in Section 216.12 (“ * * * where accessible unload areas also serve as accessible load areas...
- Hoyer Journey Stand-Up Lift
- Cybex Total Access Recumbent Bike
-
Stair widths
However, 1014.8 discusses projections and allows projections into the required width of stairs up to 4 1/2" at or below the handrail height....
-
Existing elevator cab size
Requires the Accessibility Specialist plan or above. (Login or upgrade your account!)
- Kompan, Inc. Flexus GXY919
-
Standards that measure needed physical or mental ability to perform a job
Possible accommodations might include lowering the shelf-height, providing a step stool or other assistive device....
-
11B-404.2.10 Door and gate surfaces
stiles and having a bottom rail or shoe with the top leading edge tapered at 60 degrees minimum from the horizontal shall not be required to meet the 10 inch (254 mm) bottom smooth surface height...
-
F226.1 General
Consider work surfaces that are flexible and permit installation at variable heights and clearances....
-
404.2.10 Door and Gate Surfaces
stiles and having a bottom rail or shoe with the top leading edge tapered at 60 degrees minimum from the horizontal shall not be required to meet the 10 inch (255 mm) bottom smooth surface height...
-
5.4.2.2 Transfer and Positioning Support Length Recommendations for Imaging Equipment with Transfer Surfaces
A positioning support (for transfer surfaces >24” deep) is to extend horizontally along the side of the patient scanning/imaging bed/table with a length of 12 to 16 inches and a height...
-
Using the ORAR Exceptions [F202.3, Exception 4 and 1016, Exceptions 1, 2, and 3]
instance, where traffic calming devices, gates, or other barriers are provided on a paved roadway, the ORAR must have a clear width of 36 inches and obstacles cannot exceed one-half inch in height...