The owner can use this information to determine the sequence and extent of work to be included in each phase of the project....
Search Results "Kitchen Work Surface"
Filters
Commonly Searched Documents
-
Looking at Cal Green 5.106.5.3, we must provide the conduits and panel capacity for future installation for the required number of spaces (2 in this case). However, it is only when the equipment is to be installed that we need to refer to CBC and CEC. Section 11B-228.3.1 also reiterates this. Therefore, we would show the location of the conduit stub outs adjacent to 2 current parking spaces and would show space on the electric panel for the future equipment – and that is all. At this time, we do not need to show the requirements for EV accessibility when equipment is installed per Chapter 11B. Is my interpretation correct?
-
Fair Labor Standards Act Section 14(c)
Department of Labor’s Wage and Hour Division, to pay subminimum wages to workers who have disabilities for the work being performed....
-
Executive Summary
Mitigation of glare from daylight through windows and other openings, from artificial lighting fixtures, surface reflections, etc. iv....
-
RESEARCH OBJECTIVES
Objectively measure the firmness and stability of the test surfaces; 3....
-
11B-505.5 Clearance
Clearance between handrail gripping surfaces and adjacent surfaces shall be 1½ inches (38 mm) minimum....
-
11B-505.5 Clearance
Clearance between handrail gripping surfaces and adjacent surfaces shall be 1½ inches (38 mm) minimum....
-
§382.57(b)(4)(ii)
(ii) Maintained in proper working condition....
-
§382.57(a)(5)(ii)
(ii) Maintained in proper working condition....
-
§ 382.57(b)(4)(ii)
(ii) Maintained in proper working condition....
-
§ 382.57(a)(5)(ii)
(ii) Maintained in proper working condition....
-
Attachment G: Modifications to Newly Constructed Facilities
Attachment G: Modifications to Newly Constructed Facilities
-
606.2 Clear Floor Space (Exception 3)
residential dwelling units, other than emergency transportable housing units required to provide mobility features complying with 809.2, cabinetry shall be permitted under lavatories and kitchen...
-
11B-705.1.1.4 Resiliency
Detectable warning surfaces shall differ from adjoining surfaces in resiliency or sound-on-cane contact....
-
11B-705.1.1.4 Resiliency
Detectable warning surfaces shall differ from adjoining surfaces in resiliency or sound-on-cane contact....
-
Examples of Implementation Methods
Coordinating committee formed ten working groups (public safety, etc.). 2....
-
PEMKO 5" Latching Panic Saddle Threshold No. 2005-V
About Latching Panic Saddle Thresholds Latching Panic thresholds are designed to work in conjunction with surface applied vertical rod exit devices....
-
PEMKO 5" Latching Panic Saddle Threshold No. 2005-P
About Latching Panic Saddle Thresholds Latching Panic thresholds are designed to work in conjunction with surface applied vertical rod exit devices....
-
Dome Spacing: ADA Standard Section 705.1.2
Truncated domes in a detectable warning surface shall have a center-to-center spacing of 1.6 inches (41 mm) minimum and 2.4 inches (61 mm) maximum, and a base-to-base spacing of 0.65 inch...
-
11B-307.3.1 Edges and corners
Where signs or other objects are mounted on posts or pylons, and their bottom edges are less than 80 inches (2032 mm) above the floor or ground surface, the edges of such signs and objects...
-
4.29.3* TACTILE WARNINGS ON DOORS TO HAZARDOUS AREAS
to areas that might prove dangerous to a blind person (for example, doors to loading platforms, boiler rooms, stages, and the like) shall be made identifiable to the touch by a textured surface...
-
Alterations to Existing Facilities
It is not intended for additional work to be done outside the scope of the project....
-
11B-505.10.3 Bottom extension at stairs
Extension shall return to a wall, guard, or the landing surface, or shall be continuous to the handrail of an adjacent stair flight....
-
1630.2(j)(3)
(3) With respect to the major life activity of working --...
-
1630.2(n)(3)(VI)
(VI) The work experience of past incumbents in the job; and/or...
