DOOR RANGES - 1 3/8" to 2" BACKSET - 2 3/4" Standard or 2-3/8" optional backset. LATCH FACEPLATE -Standard - 1 1/8" x 2 1/4" for 2-3/4" backset....
Search Results "Door Clear Width"
-
Cal-Royal CR6000 Series Digital Touch Screen Door Lock
-
III. CONCLUSION
For the foregoing reasons, neither Section 904.4.1 nor its exception requires clear counter space at sales and service counters subject to the ADA’s requirements....
-
Panda S.12 Solid Wood Lift & Slide System
The solid hard wood core increases the door strength and longevity over other wood door systems....
-
Kawneer North America 350/500 Tuffline™ Entrances
stiles (500 Tuffline™ Entrances) with 2" (50.8) deep door sections on both Door heights range from 7 to 9 feet; widths from 3 to 4 feet Door frame face width is 2" (50.8) and depth...
-
Toilet Compartments
The clear floor space required for a baby changing table by TAS 902.2 may overlap the water closet clearance based on TAS 604.3.2 since baby changing tables are considered convenience “fixtures...
-
4.35.4 Bench
Clear floor space shall be provided alongside the bench to allow a person using a wheelchair to make a parallel transfer onto the bench....
-
Panda TS.19 Thermally Broken Lift & Slide System
A variety of door configurations and opening sizes can be accommodated....
-
HEWI System 111 Door Hardware
The hardware System 111 is modular and can therefore be aligned with individual requirements. A large selection of materials, colours, design variants and rose shapes and backplates...
-
HEWI Range 250 Door Hardware
The new hardware range 250 impresses with its delicate look and feel. Its dynamic style is created by a combination of organic and geometric elements. Light is broken on the surface...
-
Figure 703.4.2 Location of Tactile Signs at Doors – Drawing from the U.S. Access Board
-
Activar Hiawatha HG111 & HG112 Straight Tubular Pulls and HG113 & HG114 Push Bars
• Plate & Pull Combinations • Standard Pulls • Push & Pull Bar Sets • Custom & Unique Pulls • Full Height Pulls • Door Protection Plates & Edges • Auto...
-
11B-604.8.1.1 Size
Wheelchair accessible compartments shall be 60 inches (1524 mm) wide minimum measured perpendicular to the side wall, and 56 inches (1422 mm) deep minimum for wall hung water closets...
-
11B-604.8.1.1 Size
11B-604.8.1.1 Size. Wheelchair accessible compartments shall be 60 inches (1524 mm) wide minimum measured perpendicular to the side wall, and 56 inches (1422 mm) deep minimum for...
-
11B-408.4.1 Car dimensions and doors
Elevator cars shall provide a clear width 42 inches (1067 mm) minimum and a clear depth 54 inches (1372 mm) minimum....
-
11B-408.4.1 Car dimensions and doors
Elevator cars shall provide a clear width 42 inches (1067 mm) minimum and a clear depth 54 inches (1372 mm) minimum....
-
Panda TS.13 Aluminum/Wood Clad Thermally Broken Lift & Slide System
Maximum Panel Width: Up to 10 feet. Panel Weight: Approximately 7 to 8 lbs/sqft depending on overall panel size....
-
Kawneer North America 260/360/560 Insulclad™ Thermal Entrances
Key Features Include: Both the door and frame are thermally broken Complete package of door, fully integrated door frame (with or without transoms) and integrated hardware; stile...
-
Stair widths
There seem to be sections in CBC Chapter 10 that contradict each other regarding stair widths....
-
Panda S.15 All Wood with Aluminum Core Lift & Slide System
Maximum Panel Width: Up to 10 feet. Panel Weight: Approximately 8 to 9 lbs/sqft depending on overall panel size....
-
404.2.4.4 Floor or Ground Surface
404.2.4.4 Floor or Ground Surface. Floor or ground surface within required maneuvering clearances shall comply with 302. Changes in level are not permitted. EXCEPTIONS: 1. Slopes...
-
11B-404.2.4.4 Floor or ground surface
Floor or ground surface within required maneuvering clearances shall comply with Section 11B-302. Changes in level are not permitted. Exceptions: 1. Slopes not steeper...
-
404.2.4.4 Floor or Ground Surface
Floor or ground surface within required maneuvering clearances shall comply with 302. Changes in level are not permitted. EXCEPTIONS: 1. Slopes not steeper than 1:48 shall be...
-
404.2.4.4 Floor or Ground Surface
Floor or ground surface within required maneuvering clearances shall comply with 302. Changes in level are not permitted. EXCEPTIONS: 1. Slopes not steeper than 1:48 shall be...
-
6.14.2 Gate Hardware
Gate hardware shall comply with operable controls requirements in ABAAS section 309.4 and 404.2.7.
