submit an equivalent alternative request concerning movable armrests must show the Department that, in fact, persons with mobility impairments using aisle and boarding wheelchairs can transfer...
Search Results "Transfer Side"
-
382.61 What are the requirements for movable aisle armrests?
-
11B-224.2.2 More than fifty guest room facilities
ETA considers the ADA requirement for rooms without roll-in showers to be a recognition that some individuals with mobility impairments actually prefer an accessible bathtub or transfer-type...
-
4. Assess During the Planning, Installation and Maintenance Phases
The clear ground space at all accessible play components entry and egress must be level for a child to transfer safely from a wheelchair to the play component....
-
Toilet Buildings and Pit Toilets
Of the required width of clear floor space, ensure that only 16 to 18 inches (405 to 455 millimeters) is on one side of the centerline of the riser; the rest must be on the other side....
-
105.2.2 ASME
that at least two flat steps be provided at the entrance and exit of every escalator and that steps on escalators be demarcated by yellow lines 2 inches wide maximum along the back and sides...
-
105.2.2 ASME
that at least two flat steps be provided at the entrance and exit of every escalator and that steps on escalators be demarcated by yellow lines 2 inches wide maximum along the back and sides...
-
H. Barriers Affecting Accessibility and Usability of Medical Diagnostic Equipment
., stiffness, comfort, color contrast), supports for transferring onto and off of equipment and positioning their bodies on the equipment (e.g., handholds, armrests, side rails), controls...
-
Research and its applications, medium-term and long term
That then also gets added to on most of the people on this side really developing kind of a conceptual model of what are these constraints on the design....
- Medical Accessibility LLC
-
Boat Slips: ADA Standard Section 235.2
Section 235.2 covers scoping requirements in the current ADA Standards for boat slips.
-
11B-404.1 General
A sign visible from the approach side complying with Section 11B-703.5 shall be posted stating “Entry restricted and controlled by security personnel”....
-
11B-221.2.3.2 Vertical dispersion
Vertical, center, or side aisles adjoining bleacher seating that are stepped or tiered are not considered entry points. ◼ Advisory 11B-221.2.3.2 Vertical dispersion Exception 2....
-
11B-404.1 General
A sign visible from the approach side complying with Section 11B-703.5 shall be posted stating “Entry restricted and controlled by security personnel”....
-
11B-221.2.3.2 Vertical dispersion
Vertical, center, or side aisles adjoining bleacher seating that are stepped or tiered are not considered entry points. ◼ Advisory 11B-221.2.3.2 Vertical dispersion Exception 2....
-
Section H: Lifts
If a side door/gate is provided, is the clear opening width at least 42"? (§410.6) ...
-
406.7 Islands
Raised islands in crossings shall be cut through level with the street or have curb ramps at both sides....
-
1003.2.12.2 Opening limitations
Exception: The triangular opening formed by the riser, tread and bottom rail at the open side of a stairway shall be of a maximum size such that a sphere of 6 inches (152mm) in diameter...
-
R305.1.4 Size
At curb ramps and blended transitions, detectable warning surfaces shall extend the full width of the ramp run (excluding any flared sides), blended transition, or turning space....
-
704.11.1 Parapet construction
Parapets shall have the same fire-resistance rating as that required for the supporting wall, and on any side adjacent to a roof surface, shall have noncombustible faces for the uppermost...
-
General [9.1.1]
Where room numbers are provided, they must be raised and Brailled and located on the wall at the latch-sides of doors for safety and uniformity....
-
Van-Accessible Parking Spaces
(illustration showing a van with a side-mounted wheelchair lift lowered onto a marked access aisle at a van-accessible parking space....
-
11B-308.4 Suggested reach ranges for children
These dimensions apply to either forward or side reaches. ...
-
1132A.9 Smooth surface
Swinging door or gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...