In new construction, platform lifts can be used to provide an accessible route to these areas only: wheelchair spaces, performance areas, and speakers’ platforms incidental...
Search Results "Raised Work Area"
-
Where Platform Lifts are Permitted [§206.7]
-
11B-705.2 Detectable directional texture
Detectable directional texture at transit boarding platforms shall comply with Figure 11B-705.2 and shall be 0.1 inch (2.5 mm) in height that tapers off to 0.04 inch (1.0 mm), with bars raised...
-
11B-705.2 Detectable directional texture
Detectable directional texture at transit boarding platforms shall comply with Figure 11B-705.2 and shall be 0.1 inch (2.5 mm) in height that tapers off to 0.04 inch (1.0 mm), with bars raised...
-
Georgia-Pacific ® Translucent Smoke Push Paddle Roll Paper Towel Dispenser
Put the simple, clean performance of the push paddle towel dispenser to work for you....
-
Q: In areas without 9-1-1 services, are PSAPs still required to provide access for TTY users to the telephone emergency services?
Q: In areas without 9-1-1 services, are PSAPs still required to provide access for TTY users to the telephone emergency services? A: Yes....
-
Primary Function
Areas that contain a primary function include, but are not limited to, the customer services lobby of a bank, the dining area of a cafeteria, the meeting rooms in a conference center, as...
-
§ 37.3 Vanpool
capacity greater than 7 persons (including the driver) or buses, which provides transportation to a group of individuals traveling directly from their homes to their regular places of work...
-
Spectrum Industries Inc. Freedom XRS Elite Lectern™ Adjustable Height Lecterns
Ergonomics is the science that studies the relationship between people and their work environments....
-
Roadtech Manufacturing Retractable Cone Bar Barricades and Barriers
The Cone-Bar is extremely versatile for road trench or utility works use, construction sites, parking lots, pedestrian areas, and more....
-
Section 36.406(a)(2) Applicable Standards (Section-by-Section Analysis)
The major change in the rule is in the treatment of employee work areas. ...
-
804.2.1 Pass Through Kitchen
opposing sides, or where counters, appliances or cabinets are opposite a parallel wall, clearance between all opposing base cabinets, counter tops, appliances, or walls within kitchen work...
-
Tent Pads and Tent Platforms
Ensure that tent pads and tent platforms at single camping units in a recreation area meet the following requirements and are connected to the area's other major constructed features by...
-
Applicability
Individual with a Mobility Impairment - An individual with a mobility impairment is permitted to operate a Segway in a Federal building under the jurisdiction, custody or control of GSA in any areas...
-
A4.28.4 AUXILIARY ALARMS
Locating visual emergency alarms in rooms where deaf individuals may work or reside alone can ensure that they will always be warned when an emergency alarm is activated....
-
4. Overhead PV Systems
Access to the PV system is limited to operations and service personnel: There are no accessibility requirements in the area of work.7 The project is not an alteration that...
-
11B-411.2.3.2 Car designation signs
Signs shall be provided in both raised characters and Braille. Raised characters shall be 2 inches (51 mm) high. Raised characters shall be white on a black background....
-
11B-411.2.3.2 Car designation signs
Signs shall be provided in both raised characters and Braille. Raised characters shall be 2 inches (51 mm) high. Raised characters shall be white on a black background....
-
Visual Alarms [4.28.3]
Visual alarms are required in hallways, lobbies, restrooms, and any other general usage and common use areas, such as meeting and conference rooms, classrooms, cafeterias, employee break...
-
11B-411.2.1.5.1 Size
Buttons shall have square shoulders, be 3/4 inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding...
-
11B-411.2.1.5.1 Size
Buttons shall have square shoulders, be 3/4 inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding...
-
11B-804.2.1 Pass through kitchen
opposing sides, or where counters, appliances or cabinets are opposite a parallel wall, clearance between all opposing base cabinets, counter tops, appliances, or walls within kitchen work...
-
A. Changes in Level
Yes __ No __ N/A __ Comments: ___________________________________________ ...the lobby and any restaurants, other dining areas, and vending/ice machine areas?...
-
11B-407.4.7.1.2 Location
Raised characters or symbols and Braille designations shall be placed immediately to the left of the control button to which the designations apply. Exception: Reserved....
-
11B-407.4.7.1.2 Location
Raised characters or symbols and Braille designations shall be placed immediately to the left of the control button to which the designations apply. Exception: Reserved....
