The slope of the clear floor or ground space must not exceed 1:48 (2 percent) in any direction....
Search Results "Floor Button"
Filters
Commonly Searched Documents
-
Fire Rings, Grills, Fireplaces, and Wood Stoves
-
Picnic Tables
In addition to the clear floor or ground space for each wheelchair seating space, provide a 48-inch (1,220-millimeter) clear floor or ground space around the usable portions of the table...
-
ASI Global Partitions Powder Coated Steel Partitions
Pilaster Mounting Pilaster adjustments, with floor-mounted jack-leveling device are standard on floor anchored/ overhead braced pilasters Pilaster Mounting Pilaster adjustments, with...
-
405.9.2 Curb or Barrier
A curb or barrier shall be provided that prevents the passage of a 4 inch (100 mm) diameter sphere, where any portion of the sphere is within 4 inches (100 mm) of the finish floor or ground...
-
E2-b
Are pedestrian routes leading to or serving each of the service or activity areas free of overhead objects with the bottom edge lower than 80 inches above the floor?...
-
2. Public Pay Phones
If more than one bank of public pay phones is provided on a given floor, does at least one pay phone per bank have the following features: [ADA Stds. 4.1.3(17)]...
-
306.3.1 General
Space under an element between 9 inches (230 mm) and 27 inches (685 mm) above the finish floor or ground shall be considered knee clearance and shall comply with 306.3....
-
4.1.3(8)(a)(i)
At least one must be a ground floor entrance. Public entrances are any entrances that are not loading or service entrances....
-
4.16.5* Flush Controls
Controls for flush valves shall be mounted on the wide side of toilet areas no more than 44 in (1120 mm) above the floor....
-
4.16.5* FLUSH CONTROLS
Controls for flush valves shall be mounted on the wide side of toilet areas no more than 44 in (1120 mm) above the floor....
-
405.9.2 Curb or Barrier
A curb or barrier shall be provided that prevents the passage of a 4 inch (100 mm) diameter sphere, where any portion of the sphere is within 4 inches (100 mm) of the finish floor or ground...
-
When door vision lights are limited to 100 square inches by the fire code, is compliance with the specified maximum height of 43” to the bottom edge still required?
However, compliance is not required when the lowest part of the vision light is more than 66” from the finish floor or ground....
-
11B-608.10 Soap dish
Where a soap dish is provided, it shall be located on the control wall at 40 inches (1016 mm) maximum above the shower floor, and within the reach limits from the seat....
-
Delta Single Function Hand Shower with Grab Bar RPW124HDF
Product Features and Benefits Two-setting white hand shower Two integral check valves for backflow protection Features Touch-Clean spray holes Push button...
-
Doorbell Factory Small Rectangle Stainless Steel Doorbell
Solid 3/16" thick Stainless Steel Plate Comes with non-lighted stainless steel push button and mounting screws Measures 1" W X 3" H Usually ships in 1-3 business...
-
Lutron Wireless Maestro Lighting Control
incredibly easy to install and operate, allowing you to control lighting levels with any combination of up to 10 dimmers, switches, sensors and wireless controls — all with the touch of a button...
-
Hager Companies Five Knuckle - Full Mortise Swing Clear Hinge BB1363
Five Knuckle - Full Mortise Swing Clear Hinge BB1363 - Ball Bearing - Heavy Weight Description: - ANSI A5121 - For beveled edge doors - Non-rising removable pin with button...
-
Hager Companies Five Knuckle - Full Mortise Swing Clear Hinge BB1361
Knuckle - Full Mortise Swing Clear Hinge BB1361 - Ball Bearing - Standard Weight Description: - ANSI A5122 - For beveled edge doors - Non-rising removable pin with button...
-
Hager Companies Five Knuckle - Half Mortise Swing Clear Hinge BB1264
Five Knuckle - Half Mortise Swing Clear Hinge BB1264 - Ball Bearing - Heavy Weight Description: - ANSI A8221 - For square edge doors - Non-rising removable pin with button...
-
Hager Companies Five Knuckle - Half Surface Swing Clear Hinge BB1270
Five Knuckle - Half Surface Swing Clear Hinge BB1270 - Ball Bearing - Heavy Weight Description: - ANSI A8421 - Beveled surface leaf - Non-rising removable pin with button...
-
Hager Companies Five Knuckle - Full Mortise Swing Clear Hinge BB1360
Five Knuckle - Full Mortise Swing Clear Hinge BB1360 - Ball Bearing - Standard Weight Description: - ANSI A5122 - For square edge doors - Non-rising removable pin with button...
-
Hager Companies Five Knuckle - Full Mortise Swing Clear Hinge BB1362
Five Knuckle - Full Mortise Swing Clear Hinge BB1362 - Ball Bearing - Heavy Weight Description: - ANSI A5121 - For square edge doors - Non-rising removable pin with button...
-
Hager Companies Five Knuckle - Full Surface Swing Clear Hinge BB1266
Five Knuckle - Full Surface Swing Clear Hinge BB1266 - Ball Bearing - Heavy Weight Description: - ANSI A8321 - Beveled surface leaves - Non-rising removable pin with button...
-
Hager Companies Five Knuckle - Half Mortise Swing Clear Hinge BB1265
Five Knuckle - Half Mortise Swing Clear Hinge BB1265 - Ball Bearing - Heavy Weight Description: - ANSI A8221 - For beveled edge doors - Non-rising removable pin with button...
