Equipment components are permitted to be located within 8 inches (205 mm) maximum of the centerline of the clearance width....
Search Results "Expected Maximum Flight Duration"
Filters
Commonly Searched Documents
-
M301.4 Lift Compatibility
-
24. Educational setting
Section 104.34 prescribes standards for educating handicapped persons with nonhandicapped persons to the maximum extent appropriate to the needs of the handicapped person in question....
-
Element-by-Element Safe Harbor for Existing Facilities
For example: The 1991 Standards allowed light switches, thermostats, and other controls to be installed at a maximum height of 54 inches....
-
Trailhead Signs
minimum the following information: Trail name Length of the trail Type of surface on the trail Typical and minimum trail tread width Typical and maximum...
-
III-8.4000 Suit by the Attorney General
All violations found in the first suit against a covered entity are considered to be the first violation, so that the maximum penalty that may be assessed in that suit is $50,000....
-
Required Means of Egress [IBC §1007.1 (2003), §1003.2.13 (2000)]
For example, a business occupancy with no more than 30 occupants and a maximum exit access travel distance of 75 feet is permitted to have a single means of egress....
-
703.3.1 Dimensions and Capitalization
Table 703.3.1 Braille Dimensions MEASUREMENT RANGE MINIMUM IN INCHES MAXIMUM IN INCHES Dot base diameter 0.059...
-
11B-1009.3.3 Handrails
The clear width between required handrails shall be 33 inches (838 mm) minimum and 38 inches (965 mm) maximum. Exceptions: 1. ...
-
Chapter 3: Building Blocks
Substantive revisions made in the final rule include: lowering the maximum height for side reaches from 54 to 48 inches (308.3.1) providing a limited exception from this...
-
610.3 Shower Compartment Seats
The top of the seat shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the bathroom finish floor. Seats shall comply with 610.3.1 or 610.3.2....
-
703.3.1 Dimensions and Capitalization
Table 703.3.1 Braille Dimensions Measurement Range Minimum in Inches Maximum in Inches Dot base diameter 0.059 (1.5 mm) to 0.063 (1.6 mm)...
-
F228 Depositories, Vending Machines, Change Machines, and Mail Boxes
These elements are subject to requirements for operable parts in section 309, which specify location within accessible reach ranges and maximum operating forces....
-
Accessible Routes
The accessible route must comply with ADAAG provisions for the location, width (minimum of 36 inches), passing space, head room, surface, slope (maximum of 1:12 or 8.33%), changes in level...
-
Tax Credits and Deductions
The tax deduction is available to all businesses with a maximum deduction of $15,000 per year....
-
610.3 Shower Compartment Seats
The top of the seat shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the bathroom finish floor. Seats shall comply with 610.3.1 or 610.3.2. ...
-
Parking Spaces [4.6.3]
A maximum slope of 2% is required in all directions for both the space and access aisle since level surfaces are important for wheelchair transfer to and from vehicles....
-
2. a. Accessible route into and throughout the facility
The accessible route shall, to the maximum extent feasible, coincide with the route for the general public....
-
Location [§208.3]
A maximum travel distance is not specified in the Standards....
-
11B-704.4.1 Height
wheelchair accessible telephone because the required 34 inches (865 mm) minimum keypad height can causes the highest operable part of the telephone, usually the coin slot, to exceed the maximum...
-
11B-704.4.1 Height
wheelchair accessible telephone because the required 34 inches (865 mm) minimum keypad height can causes the highest operable part of the telephone, usually the coin slot, to exceed the maximum...
-
11B-703.7.2.6 Toilet and bathing facilities geometric symbols
Geometric symbols at entrances to toilet and bathing rooms shall be mounted at 58 inches (1473 mm) minimum and 60 inches (1524 mm) maximum above the finish floor or ground surface measured...
-
Expert Report of Ken Schoonover, P.E., KMS Associates, Inc. (August 7, 2018)
Sidewalks & Walkways: The cross slopes in the designated accessible routes exceed the maximum slope allowed of 1:48 (1991 ADA Stds 4.3.7; 2010 ADA Stds 403.3)....
-
OVERVIEW
The type of aid that will be required for effective communication will depend on the individual’s usual method of communication, and the nature, importance, and duration of the communication...