Storage elements shall comply with at least one of the reach ranges specified in Section 11B-308.
Search Results "Door Height"
Filters
Commonly Searched Documents
-
11B-811.3 Height
-
11B-309.3 Height
Operable parts shall be placed within one or more of the reach ranges specified in Section 11B-308.
-
11B-407.2.1.1 Height
Call buttons and keypads shall be located within one of the reach ranges specified in Section 11B-308, measured to the centerline of the highest operable part. Exception:...
-
11B-407.4.6.4.1 Height
Emergency control buttons shall have their centerlines 35 inches (889 mm) minimum above the finish floor.
-
Sargent LS8600 Low Profile Center and Top Latch Concealed Vertical Rods Exit Device
The LS8600 has security of a stainless steel center bolt, concealed top bolt and a low profile device for single doors without the issues of a bottom rod....
-
Corbin Russwin Inc. ED3000 Series Crossbar Exit Device
The ED3000 is available as Rim, Mortise, and Surface Vertical Rod. Designed for applications in high-use, high-abuse situations, ED3000 Crossbar Exit Devices can be teamed with a...
-
Corbin Russwin Inc. ED8000 Pushpad Exit Device
Heavy-duty steel construction and Grade 1 performance, priced for outstanding value. Meets rigorous life safety and security requirements, while offering pleasing aesthetics and...
-
Allegion Von Duprin 22 Series Exit Devices
Exit devices are a critical part of the Fire and Life Safety egress system and will provide safe and reliable service when properly applied and maintained. Von Duprin designs and...
-
Yale 1800 Series Flatbar Exit Device
An economical, light/medium duty Grade 2 lever lockset which provides an outstanding combination of value and performance. It’s the ideal lever lockset for light commercial and...
-
Allegion Falcon 19 Series Exit Devices
When low cost and dependability are essential, you can count on the Falcon 19 Series. The 19 Series is built to stand up in high traffic applications and is available with a wide...
-
Allegion Falcon XX Series Cross Bar Exit Devices
For high use areas that demand high-performing products, the Falcon XX Series fills the bill with a sleek, tough and attractive exit device that delivers ANSI Grade 1 performance....
-
Yale 2100 Series Flatbar Exit Device
It’s no secret that the 2100 series flatbar exit device has a reputation as the right choice for meeting the rigors of demanding industry segments. The quality and certified...
-
TownSteel MRXL Grade 1 Mortise Lock with Ligature Resistant Rose Trim
MRXL series is ANSI Grade 1 mortise lock set with ligature resistant lever trim. MRX-S-L provides rose trim for new or retrofit application.
-
Allegion Von Duprin 98/99 Series Exit Devices
Exit devices are a critical part of the Fire and Life Safety egress system and will provide safe and reliable service when properly applied and maintained. Von Duprin designs and...
-
Corbin Russwin Inc. FE6700 Storm Shutter Multi-Point Latching System
The Corbin Russwin FE6700 is a robust three-point locking system engineered to help save lives by securing the community shelter window openings. Extra-heavy duty steel components...
-
Yale 6000 Series Commercial Exit Devices
With its robust, modern design and smooth, quiet operation, the Yale 6000 Series exit device provides an attractive solution that can withstand the rigors of multi-family, retail,...
-
M305.2.8 Fittings
Transfer supports shall not rotate within their fittings when in place for transfer.
-
M305.2.7 Clearance
Clearance between the transfer support gripping surface and adjacent surfaces or obstructions shall be 1 ½ inches (38 mm) minimum.
-
M305.2.7 Clearance (Section-by-Section Analysis)
In the MDE NPRM, the Access Board did not provide any specific requirements for clearances around the transfer support. However, in the preamble to the MDE NPRM the Access Board...
-
M305.2.8 Fittings (Section-by-Section Analysis)
The MDE NPRM proposed to require that transfer supports not rotate in their fittings (proposed M305.2.3). Five commenters addressed this provision. Four of the commenters disagreed...
-
5.4.10 Transfer Support Fittings Recommendations for M301 and M302
5.4.10 Transfer Support Fittings Recommendations for M301 and M302 Description: To ensure safe and effective transfers, transfer supports must not rotate within their fittings...
-
5.4.10 Transfer Support Fittings for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position
5.4.10 Transfer Support Fittings for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position. The transfer supports shall not rotate when locked in place for patient...
-
III. CONCLUSION
For the foregoing reasons, neither Section 904.4.1 nor its exception requires clear counter space at sales and service counters subject to the ADA’s requirements.
-
M305.2.3 Fittings
Transfer supports shall not rotate within their fittings.
