LR6000 Hospital Latch Wide Paddle Cylindrical Hospital Latch 1-3/4" standard door thickness (specify if different) Meets ADA requirements ...
Search Results "Door Height"
Filters
Commonly Searched Documents
-
Architectural Builders Hardware Mfg., Inc. 6000 Series Wide Paddle Cylindrical Hospital Latch
-
Check Height and Location of the Pushbutton
Check Height and Location of the Pushbutton Confirm that pushbutton height and location conform to specifications and can be reached by a person in a wheelchair, from a hard surfaced level...
-
11B-226.3 Dining surfaces exceeding 34 inches in height
Where food or drink is served for consumption at a counter exceeding 34 inches (864 mm) in height, a portion of the main counter 60 inches (1525 mm) minimum in length shall be provided in...
-
Sargent 8200 Mortise Lock with Push/Pull Trim
design approach to healing environments Provides a functional ligature-resistant solution for behavioral health units Multiple mounting orientations for flexibility and safety Easy door...
-
Sunlighten Community Solocarbon® Far Infrared Sauna
infrared heat available, are ultra low EMF for ultimate safety and are clinically tested to lower blood pressure, aid in detoxification and weight loss. 100% ADA-compliant with 36” door...
-
M301.2.3.1 End Transfer Surface
End transfer surfaces shall be 28 inches (710 mm) wide minimum and 17 inches (430 mm) long minimum. EXCEPTION: Transfer surfaces for imaging equipment with bores shall be...
-
M301.2.3.2 Side Transfer Surface
Side transfer surfaces shall be 28 inches (710 mm) wide minimum and 28 inches (710 mm) long minimum. EXCEPTION: Transfer surfaces for imaging equipment with bores shall be...
-
M301.2.4 Unobstructed Transfer
Each transfer surface shall provide two unobstructed sides for patient transfer. EXCEPTIONS: 1. Obstructions no more than 3 inches (75 mm) deep shall be permitted to extend beyond...
-
M301.4 Lift Compatibility
Diagnostic equipment shall be usable with portable patient lifts and, when in use with such lifts, shall comply with M301.4.1 or M301.4.2. EXCEPTION: Where fixed overhead patient...
-
M301.2.4 Unobstructed Transfer (Section-by-Section Analysis)
In the MDE NPRM the Access Board proposed that each transfer side provide unobstructed access to the transfer surface, with an exception to permit temporary obstructions as long as...
-
M301.4 Lift Compatibility
Diagnostic equipment shall be usable with a patient lift and shall comply with M301.4.1 or M301.4.2.
-
M301.2.3 Transfer Sides
The transfer surface shall be located to provide options to transfer from a mobility device onto one short side (depth) and one long side (width) of the surface. Each transfer side...
-
Door and Signal Timing
Section 407.3.4 specifies door and signal timing....
-
Yale nexTouch™ Keypad Lock
Take the next step in security with the nexTouch™ Keypad Access Lock from Yale®. nexTouch combines a modern look and innovative access control technology with an array of bold new...
-
Hager Companies Push/Pull Latch 311H
Hager Push/Pull Latch 311H: - New design replacing 311D - Engraving is available (optional) - Non-handed - Hospital latch Standard Materials: - Zinc and...
-
TownSteel THPP Push and Pull Plate
TSPP Push and Pull is made from 16 gage stainless steel. Many different sizes to choose. Specification: Material 16 gage thick stainless steel Screws Sheet metal Size 3-1/2"...
-
TownSteel MRXL Grade 1 Mortise lock with Ligature Resistant Escutcheon
MRXL series is ANSI Grade 1 mortise lock set with ligature resistant lever trim. MRX-E-L provides escutcheon trim for new or retrofit application.
-
Doorbell Factory Nutone Plug-In Chime with Strobe Light & Pushbutton
White receiver with built-in strobe light can be plugged into a convenient wall outlet Ideal for hearing impaired or noisy environments White rectangular shaped...
-
TownSteel MRXA Grade 1 Mortise Lock with Ligature Resistant Trim
MRXA series is ANSI Grade 1 mortise lock set with 5-Point ligature resistant arch trim. It is applicable for new or retrofit application. US patent # 9033375.
-
Don-Jo Mfg., Inc. Push Plate 69
Product Specifications Number 69 Dimensions 3" x...
-
Architectural Builders Hardware Mfg., Inc. 6830 Series Time Out/Reverse Low Profile Hospital Latch
6830 Series Template - Low Profile, Reverse Latch, Cylindrical Push Pull Reverse Latch Cylindrical push/pull reverse latch 1-3/4" standard door thickness (specify if different...
-
4.2 Physical Accessibility Barriers and Solutions
of the existing counter Facility has two floors but no elevator Ask staff to move equipment that you use to the ground level Install an elevator Interior doors...
