If the barrier is less than 1220 mm (48 in.) wide, the standard calls for a minimum passage width of 1065 mm (42 in.) and a minimum turn-around space depth of 1220 mm (48 in.)....
Search Results "Standards Development"
-
3.3.12 180-Degree Turn around a Barrier
-
Application [§201]
Application [§201] The ADA Standards apply to the various types of facilities subject to the ADA, from simple structures to complex, multi-building sites such as university campuses and...
-
10 - foot straightedge method
However, there is no standardized protocol to measure deviations in lengths less than ten feet. The same problem exists when measuring slope....
-
8. Transportation Vehicles
to new or remanufactured vehicles (they also include provisions for rail vehicles that the Board will update separately)… The Board’s vehicle guidelines serve as the basis for mandatory standards...
-
M101.5 Dimensions
The MDE Standards are based on adult dimensions and anthropometrics. Dimensions that are not stated as “maximum” or “minimum” are absolute....
-
407.4.6.3 Keypads
Car control keypads shall be in a standard telephone keypad arrangement and shall comply with 407.4.7.2....
-
i.
"Suspicious Minds" Exhibit ramp leading to the exhibits; and See Standards § 4.8.5(3)....
-
407.4.6.3 Keypads
Car control keypads shall be in a standard telephone keypad arrangement and shall comply with 407.4.7.2....
-
E202.1 General
ICT shall be exempt from compliance with the Revised 508 Standards to the extent specified by E202....
-
E202.4 Federal Contracts
ICT acquired by a contractor incidental to a contract shall not be required to conform to the Revised 508 Standards....
-
225(d)(1)(B)
(B) establish minimum standards that shall be met in carrying out subsection (c) of this section;...
-
Station platforms
(DOT ADA Standard 810.5.3.)...
-
M18
[ADA Standards § 4.16.5] Yes No...
-
11B-705.1.1.3.1
Detectable warning surfaces shall be yellow and approximate FS 33538 of Federal Standard 595C....
-
§40.3(b)(3)
(3) The alteration of an existing building, or of such portions thereof, to which application of the standards is not structurally feasible....
-
ADMINISTRATIVE AUTHORITY
A governmental agency that adopts or enforces regulations and standards for the design, construction, or alteration of buildings and facilities....
-
§100.201a(b)
(b) The addresses of organizations from which the referenced standards can be obtained appear below:...
-
Scoping
The minimum number of guest rooms required to be accessible in transient lodging facilities is covered by section 224 of the 2010 Standards....
-
Overview
The revised 2010 Standards change that. For the first time, the 2010 Standards set minimum requirements for making swimming pools, wading pools, and spas (pools) accessible....
-
After January 26, 1992
Any state or local government facility that was altered after January 26,1992 was required to be altered in compliance with the ADA Standards or UFAS....
-
Architectural Barriers Act (ABA) and the Americans with Disabilities Act (ADA)
The Architectural Barriers Act requires federal buildings to comply with accessibility standards. The U.S. Access Board, my agency and their Office of Gen....
-
11B-809.1 General
[2010 ADA Standards] 809.1 General. Residential dwelling units shall comply with 809....
-
11B-604.5.1 Side wall
[2010 ADA Standards] 604.5.1 Side Wall....
-
11B-228.1 General
[2010 ADA Standards] 228.1 General. Where provided, at least one of each type of depository, vending machine, change machine, and fuel dispenser shall comply with 309....