Coat hooks shall be located within one of the reach ranges specified in Section 11B-308....
Search Results "Shall"
Filters
Commonly Searched Documents
-
11B-603.4 Coat hooks, shelves and medicine cabinets
-
Handrails
Handrail gripping surfaces shall be continuous along their length and shall not be obstructed along their tops and sides....
-
608.3 Grab Bars
Grab bars shall comply with 609 and shall be provided in accordance with 608.3....
-
216.8 Toilet Rooms and Bathing Rooms
existing toilet rooms or bathing rooms do not comply with 603, directional signs indicating the location of the nearest toilet room or bathing room complying with 603 within the facility shall...
-
§8.32(e)
(e) Except as otherwise provided in this paragraph, the provisions of §§8.21(a) and (b), 8.22(a) and (b), 8.23, 8.25(a)(1) and (2), and 8.29 shall apply to facilities that are designed,...
-
608.3 Grab Bars
Grab bars shall comply with 609 and shall be provided in accordance with 608.3....
-
216.8 Toilet Rooms and Bathing Rooms
existing toilet rooms or bathing rooms do not comply with 603, directional signs indicating the location of the nearest toilet room or bathing room complying with 603 within the facility shall...
-
1009.5.7 Grab Bars
At least one grab bar on each transfer step and the transfer platform or a continuous grab bar serving each transfer step and the transfer platform shall be provided....
-
11B-1009.2.4 Seat
The seat shall be rigid and shall have a back support that is at least 12 inches (305 mm) tall....
-
4.1.3(19)(a)
(a) In places of assembly with fixed seating accessible wheelchair locations shall comply with 4.33.2, 4.33.3, and 4.33.4 and shall be provided consistent with the following table:...
-
4.34.6.7* OVENS
Ovens shall comply with 4.34.6.2 and 4.34.6.3. Ovens shall be of the self-cleaning type or be located adjacent to an adjustable height counter with knee space below (see Fig. 52)....
-
Stairs
At the top, the extension shall be parallel with the floor or ground surface....
-
11B-405.9 Edge protection
Edge protection complying with 405.9.1 or 405.9.2 shall be provided on each side of ramp runs and at each side of ramp landings. Exceptions: 1....
-
§ 38.57(b)
(b) Handrails, stanchions, and seats shall allow a route at least 32 inches wide so that at least two wheelchair or mobility aid users can enter the vehicle and position the wheelchairs...
-
11B-405.9 Edge protection
Edge protection complying with 405.9.1 or 405.9.2 shall be provided on each side of ramp runs and at each side of ramp landings....
-
1009.4.4 Surface
Surfaces of transfer walls shall not be sharp and shall have rounded edges....
-
703.3 Braille
Braille shall be contracted (Grade 2) and shall comply with 703.3 and 703.4....
-
M301.3.2 Leg Supports
Where stirrups are provided, leg supports shall also be provided and shall comply with M305.4....
-
M301.3.1 Transfer Supports
Transfer surfaces required by M301.2 shall provide transfer supports and shall comply with M305.2....
-
407.4.6.3 Keypads
Car control keypads shall be in a standard telephone keypad arrangement and shall comply with 407.4.7.2....
-
707.8 Braille Instructions
Braille instructions for initiating the speech mode shall be provided. Braille shall comply with 703.3....
-
1133A.4 Countertops
Kitchen countertops shall comply with this section and shall be provided with the following:...
-
F202.6.5.5 Assembly Areas
Assistive listening systems shall comply with F219 and assembly seating shall comply with F221....
-
707.8 Braille Instructions
Braille instructions for initiating the speech mode shall be provided. Braille shall comply with 703.3....