installations Innovative attachment method for superior lever attachment Meet accessibility Code (ADA) A117.1 for all levers Certified by Underwriters Laboratories (UL) for use on fire doors...
Search Results "Door Surface"
-
Baldwin Hardware Atlanta Escutcheon Entrance Set Door Hardware
-
HEWI Stainless Steel Pull Handles
Pull handles enable accessible ease of use for heavy external and fire compartment doors. They are designed to enable a variable gripping height from 75 to 120 cm....
-
M301.2.1 Height
The height of the transfer surface during patient transfer shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum measured from the floor to the top of the transfer surface....
-
5.3.3.1 Transfer Sides Recommendation for Exam Chairs with Fixed Footrests
The Committee recommends exam chairs with a fixed footrest have a transfer surface minimum of a 17 inch depth and a 21 inch width located on both sides of the chair to allow for a left or...
-
11B-805.7 Built-in cabinets and work surfaces
Built-in cabinets, counters and work surfaces shall be accessible, including: patient wardrobes, nurse’s stations, administrative centers, reception desks, medicine preparation areas, laboratory...
-
HEWI Polymide Pull Handles
Pull handles enable accessible ease of use for heavy external and fire compartment doors. They are designed to enable a variable gripping height from 75 to 120 cm....
-
1.1.9 Horizontal gaps and vertical alignment
horizontal discontinuities and variations in vertical alignment such as at concrete joints, gaps, grade breaks, and at the interface of concrete with other materials or elements built into the surface...
-
Hager Companies Cast Pull P8N
Cast Door Pull Materials: - Brass Certification: - Meets ANSI A156.6 for J401 Pulls...
-
Hager Companies Cast Pull 8N
Cast Door Pull Materials: - Aluminum, Brass, Bronze Certification: - Meets ANSI A156.6 for J401 Pulls...
-
Figure 404.2.4.3(a) Maneuvering Clearance at Recessed Doors and Gates – Drawing from the U.S. Access Board
-
Cross Slope
Cross Slope The cross slopes of gangways, transition plates and floating piers that are part of an accessible route must be designed and constructed not to exceed a maximum of 2...
-
Addendum D: Comparison of demographics and transfer height between Phase 1 and Phase 2 of the study
[See subsections ...]
-
4.3.7 Slope
An accessible route with a running slope greater than 1:20 is a ramp and shall comply with 4.8. Nowhere shall the cross slope of an accessible route exceed 1:50.
-
4.3.7 SLOPE
An accessible route with a running slope greater than 1:20 is a ramp and shall comply with 4.8. Nowhere shall the cross slope of an accessible route exceed 1:50.
-
Electronic instruments
Electronic instruments have been developed to measure floor flatness. Originally created to measure the flatness of concrete floors in critical applications such as narrow - aisle...
-
Circular Cross Section and Clearance (§505.5, §505.7)
Circular Cross Section and Clearance
-
Hager Companies Round Pull 10
Round Pull Door Pull Materials: - Aluminum, brass, bronze, stainless steel Certification: - Meets ANSI A156.6 for J401 Pulls...
-
Ronick Matting Systems BaseMat 300 Entrance Floor Mat
At 3/8" depth this aluminum entrance floor mat is suited for a wide range of applications ranging from surface mounted to recessed installations....
-
11B-805.7 Built-in cabinets and work surfaces
Built-in cabinets, counters and work surfaces shall be accessible, including: patient wardrobes, nurse’s stations, administrative centers, reception desks, medicine preparation areas, laboratory...
-
Hager Companies Cast Pull 7N
Cast Door Pull Materials: - Aluminum, Brass, Bronze Options: - May be combined with a plate to make a pull plate Certification: - Meets ANSI A156.6 for J401 Pulls...
-
Hager Companies Cast Pull 5N
Cast Door Pull Materials: - Aluminum, brass, bronze, stainless steel Options: - May be combined with a plate to make a pull plate Certification: - Meets ANSI A156.6 for J401 Pulls...
-
Hager Companies Cast Pull 6N
Cast Door Pull Materials: - Aluminum, brass, bronze, stainless steel Options: - May be combined with a plate to make a pull plate Certification: - Meets ANSI A156.6 for J401 Pulls...
-
Trimco 1102 Series Cast Pull
Cast from bronze, brass or aluminum, the Trimco 1102 Series Cast Pulls are offered for both thru-bolt (1102T) and surface mount (1102S) applications....
-
CRL Push Button Center Locks for Glass Doors 08 4210
08 4210 CRL Center Locks for Glass Doors For use with 1/2" (12 mm) Monolithic Tempered Glass Available in Two Sizes: 4" x 10" and 6" x 10" Choose From Three Types: Deadlatch,...
