Identification signs shall be reflectorized with a minimum area of 70 square inches (45161 mm2)....
Search Results "Load and Unload Area"
-
11B-812.8.6 Finish and size
-
11B-812.8.6 Finish and size
Identification signs shall be reflectorized with a minimum area of 70 square inches (45161 mm2)....
-
General
vehicles, or for purposes of vehicular impound, from the scoping requirement for parking spaces, provided that when these lots are accessed by the public the lot has an accessible passenger loading...
-
11B-219.5 Permanent and portable systems
Permanently installed assistive-listening systems are required in areas if (1) they accommodate at least 50 persons or if they have audio-amplification systems, and (2) they have fixed seating...
-
11B-219.5 Permanent and portable systems
Permanently installed assistive-listening systems are required in areas if (1) they accommodate at least 50 persons or if they have audio-amplification systems, and (2) they have fixed seating...
-
11B-502.6.1 Finish and size
Parking identification signs shall be reflectorized with a minimum area of 70 square inches (45,161 mm2)....
-
WET BAR
[DSA-AC] An area or space with a counter equipped with a sink and running water but without cooking facilities....
-
WET BAR
[DSA-AC] An area or space with a counter equipped with a sink and running water but without cooking facilities....
-
11B-502.6.1 Finish and size
Parking identification signs shall be reflectorized with a minimum area of 70 square inches (45,161 mm2)....
-
Adding an elevator for barrier removal trigger POT upgrades?
Site topography requires removal of barrier by adding an elevator, does this trigger POT upgrades to the area of work? ...
-
11B-206.2.4 Spaces and elements
Accessible routes must connect all spaces and elements required to be accessible including, but not limited to, raised areas and speaker platforms. ◼ Exceptions: 1. Reserved....
-
11B-206.2.4 Spaces and elements
Accessible routes must connect all spaces and elements required to be accessible including, but not limited to, raised areas and speaker platforms. ◼ Exceptions: 1. Reserved....
-
Disability and Employment Resources: SCVRD Part 1
Longevity After Injury Project interview Kelly Sieling, Charleston Area Supervisor of South Carolina Vocational Rehabilitation Department, about issues related to assistance and maintenance...
-
General: ADA Standard Section 216.1
Section 216.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for signs.
-
Shooting Facilities
., muzzle loading rifle, small bore rifle, high power rifle, bull’s eye pistol, action pistol, silhouette, trap, skeet, and archery)....
-
Compliance requirements
facilities, tables, counters, and benches), pedestrian signs, transit stops and transit shelters for buses and light rail vehicles, on-street parking that is marked or metered, and passenger loading...
-
4.3.2 LOCATION
(1) At least one accessible route within the boundary of the site shall be provided from public transportation stops, accessible parking, and accessible passenger loading zones, and public...
-
AMUSEMENT RIDE
[DSA-AC] A system that moves persons through a fixed course within a defined area for the purpose of amusement....
-
AMUSEMENT RIDE
[DSA-AC] A system that moves persons through a fixed course within a defined area for the purpose of amusement....
-
Lines of Sight: ADA Standard Section 802.2
Lines of sight to the screen, performance area, or playing field for spectators in wheelchair spaces shall comply with 802.2....
-
11B-232.2 General holding cells and general housing cells
Many detention and correctional facilities are designed so that certain areas (e.g., "shift" areas) can be adapted to serve as different types of housing according to need....