Where a bathtub is installed with surrounding walls, grab bar reinforcement shall be located on each end of the bathtub, 32 inches to 38 inches (813 mm to 965 mm) above the floor, extending...
Search Results "End-Opening Door"
Commonly Searched Documents
-
1134A.5, Item 2
-
1134A.5, Item 2
Where a bathtub is installed with surrounding walls, grab bar reinforcement shall be located on each end of the bathtub, 32 inches to 38 inches (813 mm to 965 mm) above the floor, extending...
-
Overlapping Clear Floor Space
Specifications for roll-in shower compartments indicate that an accessible lavatory can overlap the required clear floor space opposite the end with a seat and shower controls (608.2.2)....
-
17. Q. What about "911" calls? How are those made accessible to people with speech or hearing disabilities?
It is important that operators are trained to use the TDD when the caller is silent, and not only when the operator recognizes the tones of a TDD at the other end of the line....
-
II-6.6000 Curb ramps.
[Insert the following text at the end of this section.] Resurfacing beyond normal maintenance is an alteration. Merely filling potholes is considered to be normal maintenance....
-
607.3 Seat
A permanent seat at the head end of the bathtub or a removable in-tub seat shall be provided. Seats shall comply with 610....
-
11B-607.3 Seat
A permanent seat at the head end of the bathtub or a removable in-tub seat shall be provided. Seats shall comply with Section 11B-610....
-
11B-607.3 Seat
A permanent seat at the head end of the bathtub or a removable in-tub seat shall be provided. Seats shall comply with Section 11B-610....
-
11B-502.6.4.2
a maximum of 6 inches (152 mm) from the centerline of the parking space, its sides parallel to the length of the parking space and its lower corner at, or lower side aligned with, the end...
- Landscape Forms Inc. Austin Trash Receptacle
- Gamco Recessed Sanitary Napkin Disposal - ND-4
- Gamco Surface Mounted Coverall Sanitary Napkin Disposal - ND-5
-
1009.7.2 Separation
Openings within such fire-resistance-rated exterior walls shall be protected in accordance with Section 716....
-
11B-809.7.1 Width
Exception: The clear width shall be permitted to be reduced to 32 inches (813 mm) minimum at doors....
-
903.2 Clear Floor or Ground Space
Clear floor or ground space complying with 305 shall be provided and shall be positioned at the end of the bench seat and parallel to the short axis of the bench....
-
903.2 Clear Floor or Ground Space
Clear floor or ground space complying with 305 shall be provided and shall be positioned at the end of the bench seat and parallel to the short axis of the bench....
-
903.2 Clear Floor or Ground Space
Clear floor or ground space complying with 305 shall be provided and shall be positioned at the end of the bench seat and parallel to the short axis of the bench....
- Leader Dogs for the Blind
-
11B-1003.3.2 Boarding pier clearances
Every 10 feet (3048 mm) maximum of linear pier edge shall contain at least one continuous clear opening 60 inches (1524 mm) wide minimum....
-
1022.9 Stairway identification signs
They must be tactile, and located at the latch side of the door as prescribed by 2013 CBC Section 11B-703.4....
-
A. Accessible Voting Program
facilities and equipment (including, but not limited to, permanent equipment such as lifts and elevators, and temporary equipment such as portable ramps, traffic cones, signs, wedges, and door...
-
11B-216.4.4 Delayed egress locks
Signs required by Chapter 10, Section 1010.1.9.7, Item 6.4 at doors with delayed egress locks shall comply with Sections 11B-703.1, 11B-703.2, 11B-703.3, and 11B-703.5....
-
ยง 37.213(a)(2)(i)
The operator shall transmit the form no later than the end of the next business day following the request;...
-
M302.3.1 Transfer Supports (Section-by-Section Analysis)
The technical requirements for transfer supports is in M305.2 of the final rule and has been reorganized to mirror the two types of transfer surfaces (end and side) in the final rule for...